Myson WHISPA III 5000 Installation, Operating, Maintenance And After Sales Manual

Also see for WHISPA III 9000: Installation, operating, maintenance & after sales manual Installation, operating, maintenance & after sales manual

Contents

05WHISPA III ® 5000, 7000 & 90007.0 Water Connection Connect valve ends of the flexible pipes to the WHISPA III ® .Note: The direction of the arrows on the EZ flexible hosevalvesare not significant in this application. Open valves fully, check pipe connections for leaks and ventthe heat exchanger. A vent screw is provided to vent the heatexchanger.WALL WALLIsolating valvesAir vent screwFlexible pipesPipework must be positioned correctly to ensure flexible hoses are not kinked when installed. See Fig. 2.Fig. 2a Left hand view - suggestion onlyFig. 3Fig. 4Fig. 2b Right hand view - suggestion only6.07.0For ease of installation and maintenance WHISPA III ® units should be installed with flexible hoses, with integral isolating valves.Flexible hoses are supplied only with the WHISPA III ® EZ units.12"16"10"4"5.0