06 WHISPA III ® 5000, 7000 & 9000 Position the WHISPA III ® under the cupboard in the requiredlocation, with the front edge just behind the line of the plinth. Ensure that the flexible hoses are not kinked and that theelectrical cord is not in contact with hot surfaces. Replace the plinth and bring the WHISPA III ® forward into theopening so the front edge projects 5 / 16 inch through theplinth.8.0 Fitting the WHISPA III ®Grille securing screwsFront view of unitTop view of unit5/16 inch projectionFig. 5Fig. 6Unit securing screws Align the grille and secure it to the unit with two screwssupplied (use the shorter screws). Secure the unit/grille to the plinth with two screws supplied(use the longer screws).

General Information

Electrical Connection

Water Connection

Fitting the WHISPA III

Technical Data

Operating Instructions

Troubleshooting

Maintenance

Myson WHISPA III 5000 Installation, Operating, Maintenance And After Sales Manual

WHISPA III 9000

WHISPA III 5000

WHISPA III 7000