Setup and Connections ESERV-1xT Serial Servers16 ESERV-1xT (Rev. 1210)Figure 14. Paired Mode SetupTo set up a Paired Mode connection:1. Connect two serial servers to serial devices and to the network.2. Configure the serial server for Paired Mode operation (using the Ethernet Serial ServerManager or the web interface).INITIATING A HARDWARE RESET ON THE SERIAL SERVERTo initiate a Hardware Reset on the serial server, press and hold the Mode switch for 0 to 2 seconds, and thenrelease it. The LED indicators respond as follows:1. The Ready LED blinks three times per second while the button is being pressed.2. The serial server is in Reset Mode when:a. On the ESERV-11T: Port 1 LED is On and the Ready LED is Off.
