HotShot SC User Manual Rev 1.2.5 –March 2012 © NAC Image Technology IncJimmy Robinson16To test the settings you could try to PING the camera from the DOS prompt.START BUTTON | All Programs | Accessories | Command Prompt.Type ping 172.21.10.xOrType ping 192.254.127.xWhere x corresponds to the IP address of the camera.You should get a reply from the camera if it can be seen on the network as shownbelow :If there is no reply, please check again the IP address of the NIC and also that thecamera is connected with a correct Ethernet cable. (cat5e or Cat6).If you need to assign a different IP address to the camera for some reason please contact NAC technical support.6 Control & Download Software : HotShot SC LinkThe software can be accessed from the following location :START | Programs | NAC | HotShot | HotShot Link
