NAC Image Technology Hot Shot SC User Manual
                                                                       | |
Contents
| 
HotShot SC User Manual Rev 1.2.5 –March 2012 © NAC Image Technology IncJimmy Robinson49selected area will appear in the area below the Define Area Button as shown in theabove Screen Shot.6.15.1.2 Live MonitorChecking the Live Monitor will allow the current threshold level of the target area tobe displayed in the Threshold monitor.In the example left, the image in the auto trigger area has changed bya nominal value of 14. The threshold (sensitivity) for the Auto Triggeris set to 15. If the image changes slightly more then the camera willtrigger.6.15.1.3 Enable Auto TriggerThis must be checked for the auto trigger to be active. You should check this justprior to putting the camera into ARM Mode.6.15.1.4 Adjusting the Auto Trigger ThresholdThe Arrow to the left of the threshold monitor can be moved up and down the bar toadjust the Auto Trigger Threshold.6.15.2 Auto RunThis button will activate / De-Activate the Auto Run function (see section 6.16.7).6.16 Main MenusUse this … To do this…See Control Area for More informationFileConnect Connect to a Camera |
Related manuals for NAC Image Technology Hot Shot CC
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine