NAD M15 Owner's Manual

Also see for M15 C/AH: Specifications Service manual

NAD M15 Owner's Manual Manual pdf 27 page image

27OSD AND MONITOR OUTPUTThere are three outputs that contain the M15 OSD. These are MONITOR OUT CVBS, S-Video, and YUV. There are two versions of OSD, SIMPLE and FULL. Each will be superimposedover an existing video source.NAVIGATION OF THE ON SCREEN DISPLAY (OSD) MENUSThere are seven main On Screen Menus (OSD); Audio Control, THX/SPEAKER SETUP, SOURCESETUP, DISPLAY SETUP, TRIGGER SETUP, ZONE 2/MS Out, and A/V PRESETS. To enter the OSD,press the HTRM’s ENTER. Use the and to select the submenu and press toenter the submenu. Use the to back out of submenus and menu variables withoutsaving changes.Notes: Some menu options feedback direct real-time responses not requiring one to pressthe ENTER button to save the selection.Some menu lines are titles that do not have variables in them.AUDIO CONTROLThe Audio Control menu has nine submenus, BASS, TREBLE, CENTER DIALOG, TONECONTROLS, ENHANCED BASS, AUDIO DELAY, LFE LEVEL, THX AUTO, and then ENHANCEDSTEREO submenus.BASS, TREBLE, CENTER DIALOG, AND TONE CONTROLS ON/OFFThese three level controls are arbitrary. These controls allow one to tweak on-the-fly thefrequency response of the source during playback in the AUDIO CONTROL OSD menu inconjunction with the HTRM’s TONE button and the navigation buttons. Maximum andminimum values for BASS and TREBLE are +/- 10.0dB, for CENTER DIALOG they are +/- 6dB.Notes: BASS, TREBLE and CENTER DIALOG are available for surround sound sources withTHX off.Tone controls are not stored in memory, but are reset every time the M15 is switched tostandby.Turning off the tone controls bypasses all tone controls filters.Tone controls are available on the front left, right and center speakers.LFE LEVEL AND ENHANCED BASSLFE adjustment allows one to decrease the level of Low Frequency Effect encoding of digitalsource materials. This helps in conjunction with the SPEAKER LEVEL adjustments which assiststhe user in matching the A/V system. Maximum level is 0.0dB, minimum level is -10.0dBrelative to SPEAKER LEVEL adjustments.Normally, with speakers set to LARGE the subwoofer is not active. The ENHANCED BASSoption allows full range operation of the speakers with the additional bass contribution of thesubwoofer. This feature is particularly useful when one wants to experience maximum bassoutput. Please note that due to acoustic cancellation effects, the bass response may be unevenwhen using this setting.Note: The LFE and ENHANCED BASS options are part of the A/V Preset memoriesAUDIO DELAYWhen connecting the M15 to a DLP projector, there may be a delay in the picture relative tothe audio. In order to match this delay, the M15 allows up to 140ms of delay via 10msincrements.Note: The AUDIO DELAY is not stored in memory, but is reset to 0.0 every time the M15 isswitched to standby.THX AUTOSelect THX AUTO to ON when the post process decoding is to be THX controlled. When THXAUTO is set to ON then all Dolby and DTS decoding formats will automatically pass throughthe THX decoder.Note: THX Ultra 2 decoding is dependent on the speaker configurationUSING THE M15setupENGLISHFRANÇAISDEUTSCHNEDERLANDSESPAÑOLITALIANOPORTUGUÊSSVENSKAMAIN MENU-> AUDIO CONTROL-> THX/SPEAKER SETUP-> SOURCE SETUP-> DISPLAY SETUP-> TRIGGER SETUP-> ZONE 2/MS OUT-> A/V PRESETS-> (press > to advance)-> (press < to exit)AUDIO CONTROL-> BASS 0.0dB-> TREBLE 0.0dB-> CENTER DIALOG 0.0dB-> TONE CONTROLS ARE ON-> AUDIO DELAY 0ms-> LFE LEVEL 0.0dB-> ENHANCED BASS OFF-> THX AUTO ON-> ->ENHANCED STEREOAUDIO CONTROL-> BASS 0.0dB-> TREBLE 0.0dB-> CENTER DIALOG 0.0dB-> TONE CONTROLS ARE ON-> AUDIO DELAY 0ms-> LFE LEVEL 0.0dB-> ENHANCED BASS OFF-> THX AUTO ON-> ->ENHANCED STEREOAUDIO CONTROL-> BASS 0.0dB-> TREBLE 0.0dB-> CENTER DIALOG 0.0dB-> TONE CONTROLS ARE ON-> AUDIO DELAY 0ms-> LFE LEVEL 0.0dB-> ENHANCED BASS OFF-> THX AUTO ON-> ->ENHANCED STEREOAUDIO CONTROL-> BASS 0.0dB-> TREBLE 0.0dB-> CENTER DIALOG 0.0dB-> TONE CONTROLS ARE ON-> AUDIO DELAY 10ms-> LFE LEVEL 0.0dB-> ENHANCED BASS OFF-> THX AUTO ON-> ->ENHANCED STEREOAUDIO CONTROL-> BASS 0.0dB-> TREBLE 0.0dB-> CENTER DIALOG 0.0dB-> TONE CONTROLS ARE ON-> AUDIO DELAY 0ms-> LFE LEVEL 0.0dB-> ENHANCED BASS OFF-> THX AUTO ON-> ->ENHANCED STEREOM15 02 23 2006.qxd 3/7/2006 9:06 AM Page 27