33ENHANCED STEREOENHANCED STEREO is useful when maximum audio levels are required from all channels. The default forENHANCED STEREO is with all speakers set to ON. The stereo image may be redirected to any set or allof the speakers.For example, it is possible to redirect the stereo image from front to surround or rear speakers throughthe setup OSD:• Press ENTER on the HTRM remote, select AUDIO SETUP, and then scroll to ENHANCED STEREO.• Press the right navigation arrow to advance to the next menu.• Scroll to the set of speakers you want ON or OFF, then press the navigation arrow to enter theline item to edit.• Then select ON or OFF using the navigation arrows , and then ENTER on the HTRM remote.A/V PRESETSThere are five A/V Presets permanently stored in the M15’s memory. As default, access to the presets isvia the number keys 1 through Preset 5. Using the HTRM remote control press the A/V PSET button andthen the number buttons 1 through 5; the OSD will indicate the preset number chosen.SETTING UP AUDIO/VIDEO PRESETSA/V Presets are stored automatically as one enters each variable change in the M15's OSD. These variablesare;• THX/SPEAKER SYSTEM (the number of speakers)• SPEAKER LEVEL (the level of all speakers relative to the listener)• SPEAKER DISTANCE (the distance of all speakers relative to the listener)• THX ULTRA 2 settings• ENHANCED BASS (large speakers receive full bass response with subwoofer on)• LFE LEVEL (attenuation setting)To program an A/V Preset, select on the HTRM A/V PSET and then the number 1 through to 5. Thenenter the M15's OSD menu by pressing the HTRM's ENTER button. Once in the M15’s OSD change thevariables as mentioned above.Notes: Not all OSD variables that are stored by pressing the HTRM's ENTER button are part of the A/VPreset, only those mentioned above.A/V Preset 1 is the default preset for any source input not assigned to an A/V Preset.THX/SPEAKER SYSTEM-> FRONT L+R SMALL (THX)CENTER SMALL (THX)USING THE M15SetupENGLISHFRANÇAISDEUTSCHNEDERLANDSESPAÑOLITALIANOPORTUGUÊSSVENSKAENHANCED STEREO-> FRONT L+R OFF-> SURR L+R ON-> SURR BL+BR OFF-> CENTER OFF-> SUB OFFAUDIO CONTROL-> BASS 0.0dB-> TREBLE 0.0dB-> CENTER DIALOG 0.0dB-> TONE CONTROLS ARE ON-> AUDIO DELAY 0ms-> LFE LEVEL 0.0dB-> ENHANCED BASS OFF-> THX AUTO ON-> ->ENHANCED STEREOSPEAKER LEVEL-> FRONT LEFT 0.0dBSPEAKER DISTANCE-> FRONT LEFT 10ftfTHX ULTRA2-> BOUNDARY GAIN ON-> ->COMPENSATION>-> LFE LEVEL 0.0dB-> ENHANCED BASS OFF-> LFE LEVEL 0.0dB-> ENHANCED BASS OFFM15 02 23 2006.qxd 3/7/2006 9:06 AM Page 33