NAD S170i Owner's Manual

Also see for Surround Sound Preamp Processor S 170i: Owner's manual Product manual Service manual

NAD S170i Owner's Manual Manual pdf 9 page image

ENGLISHFRANÇAISDEUTSCHESPAÑOLITALIANOPORTUGUÊSSVENSKA9QUICKSTARTIn case you simply cannot wait to experience the performance of your new S170i preamplifier, we providethe following “quickstart” instructions to get you underway. They assume that the DVD/CD player isconnected to the VIDEO1 input and that the appropriate audio and video connections have been made.PLAY A DVD MOVIE (OR MUSIC CD)From the HTR 2 Press the [AMP] device key first (this selects the S170i) then press the power [ON] key,then the [DVD] key (also labeled with the numeral “1”) Use the HTR 2 remote’s [VOLUME up/down] keysto adjust the volume.Start playback of the DVD/CD player. Pressing the [SURR. MODE] key of the HTR 2 (located nest to theVOLUME DOWN key) end then pressing the [Cursor ] key you can cycle through all the S170ilistening modes that are available for the current input signal type (see “About the S170i’s ListeningModes,” below).Depending on the signals format and connections you have made, some listening modes may not yet beavailable; see “Setting up the S170i” below. You may need to use the DVD player’s on-screen menusystem to select a surround-capable signal format.Enjoy the movie or music, but be sure to set aside time to read this manual thoroughly and to set up,calibrate, and configure your S170i carefully.