NAD S170iAV Owner's Manual

NAD S170iAV Owner's Manual Manual pdf 13 page image

ENGLISHFRANÇAISDEUTSCHESPAÑOLITALIANOPORTUGUÊSSVENSKA13ABOUT THE ON-SCREEN DISPLAYS (OSD) AND FRONT-PANEL READOUTThe S170i preamplifier employs a simple, self-explanatory system of on-screen display “menus” that willappear on the system’s video monitor/TV, useful both during setup and in day-to-day operation. While theOSDs are always helpful, it is also perfectly possible to operate (or even set up) the S170i without them,because the same basic data is always shown, though sometimes in shortened format, on the preamp’sown front-panel readout.DISPLAYING THE MENUSOnce a video monitor (TV) is connected to the Monitor Output of the S170i, pressing the left or rightcursor keys of the HTR 2 remote will access the S170i’s OSD (On Screen Display) where all systemsetup parameters can be easily adjusted using the up and down and [ENTER] keys.• If the OSD does not appear, check your Monitor Out connections, and/or the settings of the format> and items of the menu (see below) using the S170i’s front-panel readout.NAVIGATING THE OSD AND MAKING CHANGESUse the remote’s [Cursor ] keys to move up or down among any OSD menu’s list of items; use the[Cursor ] keys to change the value (setting) of any item; use remote’s [Enter] key to select an OSDmenu item. Selecting from the Menu Page saves any changes you have made and departs thatmenu for the next “higher” level (or, from the Main Menu, turns the OSD off).