NAD T 765 Owner's Manual

Also see for T765: Catalog Specification sheet Manual Specifications Owner's manual

NAD T 765 Owner's Manual Manual pdf 43 page image

LOADING CODE-LIBRARIESThe HTR 3 can store a different library of default NAD codes for each of its Device Selector “pages.”If the original default library does not control your NAD CD player, tape deck, DVD player, or othercomponent, follow the procedure below to change the code-library.Begin by ensuring that the component you wish the HTR 3 to control is plugged in and powered-up(“on,” not merely in standby). To enter the HTR 3s Library Mode, simultaneously press-and-hold for 3seconds both the desired Device Selector key and the [AVPS] key, until the Learn LED turns green.While keeping the HTR 3 pointed toward the component, enter the first appropriate three-digit code-library number from the table below. Press [OFF]. If the component turns off, press [ENTER] to acceptthat code-library number and exit the Library Mode. If the component does not turn off, enter the nextthree-digit code-library number from the table.When you enter the correct number the component will turn off; press [ENTER] to accept that codelibrary number and exit the Library Mode.LIBRARY CODE NAD PRODUCT DESCRIPTION LIBRARY CODE NAD PRODUCT DESCRIPTION100 Receiver/Processor (Discrete ON/OFF) 300 Tuner101 Receiver/Processor (Toggle ON/OFF) 301 L75, L76 Tuner102 S170 302 L70 Tuner103 L75 303 L53 Tuner104 Second Zone Commands (Zone 2) 304 L73 Tuner3112 Zone 3 305 C4254112 Zone 4 306 C445105 L70 307 Txx5 Series Tuner106 L76 400 Tape Deck B107 118 401 TAPE Deck A108 L53 500 TV 280109 L73 501 MR13110 Stereo Receiver / Amplifier 502 MR20111 Stereo Second Zone 503 PMR45112 Txx5 Series 600 T535, T562, T585, M55200 CD Player 601 T550, L55201 CD Player (old) 602 T512, T531, T532, T571, T572202 5170, 5240, 5340 603 L70, L73 DVD203 5325 604 L56204 5060 605 T513, T514, T515, T517, T524, T533, T534205 M5 606 L53 DVDSEARCH MODEIf none of the codes from the table, when entered, turns on the component, and if you are quite sureyou have followed the above procedure completely and carefully, you may want to try the “search”method as follows:Enter Library Mode by simultaneously pressing-and-holding for 3 seconds both the desired DeviceSelector key and the [AVPS] key, until the Learn LED turns green. Now press-and-hold the HTR 3’s [ ] or[ ]) key; the remote will step through all the available codes at a rate of approximately 1 per second.When the component turns off, immediately release the cursor key; press [ENTER] to accept that code-library and exit the Library Mode. Try a few commands; should you prove to have stepped past theneeded code-library, re-enter the Library Mode and use the cursor key to step back to it.NOTEIt is possible that search mode will find code-libraries that operate, at least partially, some otherbrand (non-NAD) components. You may certainly exploit such capabilities as you find them.However, since we can only ensure the completeness or accuracy of NAD code-libraries, we cannotsupport the HTR 3’s operation with other-brand components.OPERATIONUSING THE HTR 3 REMOTE CONTROL43ENGLISH