NAD T 785 Owner's Manual

Also see for T785: Catalog Specification sheet Owner's manual Specifications Owner's manual

NAD T 785 Owner's Manual Manual pdf 19 page image

SOURCE SETUPFrom Setup Menu, pressing will direct you to the Source Setup menuwherein you could adjust allocate or change the settings of the following– Source Setup (Normal View), Source Setup (Table View) and iPod Setup.SOURCE SETUP (NORMAL VIEW)The Source Setup (Normal View) menu makes it possible to set, allocate orchange the following settings.SOURCEThe T 785 is equipped with ten configurable Sources. The settings for eachSource are dependent on the configurations set forth in the parameters forthat particular Source window.To change or toggle through the Sources, scroll to ‘Source’, press buttonand then ENTER or to move up or down the Source selections.NOTESource 5 is defaulted to iPod. For Source 5 to be changed and allocatedfor other inputs, go to ‘iPod Setup’ menu under the ‘Source Setup’ menu.At iPod Setup menu, set ‘Enabled’ to ‘No’ – you can now assign Source 5to other inputs or settings as desired.ENABLEDOne can enable/disable a Source via this option. This is particularly usefulif only few Sources are used and one directly selects the Source from thefront panel, bypassing unused sources.To enable or disable a particular Source, scroll to ‘Enabled’ and presskeys to select ‘Yes’ or ‘No’.NAMEA new Name maybe assigned to a Source label. For example, if your DVD playeris attached to ‘Source 1’, it is possible to rename ‘Source 1’ to ‘DVD Player.’In order to rename the Source label, scroll to ‘Name’ and press to go thecharacter. Then, press to pick through the alphanumeric selections.Press to move to the next character and at the same time save thechanges done on the current character. The name can be as long as twelvecharacters.The new Name will be shown in the VFD as well as on the OSD.ANALOG AUDIOThe T 785 has nine analog audio inputs including 7.1 input. These analoginputs - Audio 1, Audio 2, Audio 3, Audio 4, Audio 5, Audio 6, Audio Front,Audio MP and 7.1 Input can be variably assigned to each Source.Scroll to ‘Analog Audio’ and then press and then to select and assignan analog audio input to the particular Source. There are three choices– Audio, 7.1 Input or Off.When ‘Audio’ is chosen, press and then keys to select and assign thedesired audio input – 1 to 6, Front and MP.Select ‘7.1 Input’ to choose the audio signal fed to ‘7.1 Channel Input.’ If ‘Off’is selected, no incoming analog audio signal is selected by the particularSource.NOTEAn incoming digital signal present at the assigned digital input willalways take precedence over the assigned analog audio input, even ifboth are present. To maintain the analog audio input for the particularSource, select ‘Off’ at the ‘Digital Audio’ setting of the same ‘Source’menu.OPERATIONUSING THE T 785 – SETUP MENU19ENGLISH