NAD T515 Owner's Manual

Also see for T 515: Catalog Specifications

NAD T515 Owner's Manual Manual pdf 14 page image

Installation and Setup12ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKAAUDIO CONNECTION TO OPTIONAL EQUIPMENTConnect the DVD player to your optional equipment for audio output.Amplifier equipped with 2-channel analogue stereo or Dolby ProLogic ll / Pro LogicConnect the left and right AUDIO OUT jacks on the DVD player to theaudio left and right IN jacks on your amplifier, receiver, or stereo system,using the audio cables (A).Amplifier equipped with 2-channel digital stereo (PCM) oraudio / video receiver equipped with a multi-channel decoder(Dolby Digital™, MPEG 2, or DTS)1 Connect one of the DVD Player’s DIGITAL AUDIO OUT jacks(OPTICAL O or COAXIAL X) to the corresponding in jack on youramplifier.2 Use an optional digital (optical O or coaxial X) audio cable.DIGITAL MULTI-CHANNEL SOUNDA digital multi-channel connection provides the best sound quality. Forthis you need a multi-channel audio / video receiver that supports oneor more of the audio formats supported by your DVD player such asMPEG 2, Dolby Digital and DTS. Check the receiver manual and thelogos on the front of the receiver.NOTES• If the audio format of the digital output does not match thecapabilities of your receiver, the receiver produces a strong, distortedsound or no sound at all.• Six Channel Digital Surround Sound via a digital connection can onlybe obtained if your receiver is equipped with a Digital Multi-channeldecoder.• To see the audio format of the current DVD in the on-screen display,press AUDIO.CONNECTIONSAmplifier (Receiver)Rear of DVD playerAXOR LAUDIO INPUTDIGITAL INPUTOPTICAL COAXIALRear of DVD playerAmplifier (Receiver)