NAD T535 Owner's Manual

Also see for T535: Catalog Specifications Owner's manual

NAD T535 Owner's Manual Manual pdf 2 page image

Save theSe inStructionS for later uSe.follow all warningS and inStructionS marked on theaudio equipment.1 read instructions - All the safety and operating instructions should beread before the product is operated.2 retain instructions - The safety and operating instructions should beretained for future reference.3 heed warnings - All warnings on the product and in the operatinginstructions should be adhered to.4 follow instructions - All operating and use instructions should befollowed.5 cleaning - Unplug this product from the wall outlet before cleaning.Do not use liquid cleaners or aerosol cleaners. Use a damp cloth forcleaning.6 attachments - Do not use attachments not recommended by theproduct manufacturer as they may cause hazards.7 water and moisture - Do not use this product near water-for example,near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wetbasement; or near a swimming pool; and the like.8 accessories - Do not place this product on an unstable cart, stand,tripod, bracket, or table. The product may fall, causing serious injury toa child or adult, and serious damage to the product. Use only with acart, stand, tripod, bracket, or table recommended by the manufacturer,or sold with the product. Any mounting of the product should followthe manufacturer’s instructions, and should use a mounting accessoryrecommended by the manufacturer.9 A product and cart combination should be moved withcare. Quick stops, excessive force, and uneven surfaces maycause the product and cart combination to overturn.10 ventilation - Slots and openings in the cabinet are provided forventilation and to ensure reliable operation of the product and toprotect it from overheating, and these openings must not be blockedor covered. The openings should never be blocked by placing theproduct on a bed, sofa, rug, or other similar surface. This product shouldnot be placed in a built-in installation such as a bookcase or rack unlessproper ventilation is provided or the manufacturer’s instructions havebeen adhered to.11 power Sources - This product should be operated only from the typeof power source indicated on the marking label. If you are not sure ofthe type of power supply to your home, consult your product dealer orlocal power company.The primary method of isolating the amplifier from the mains supplyis to disconnect the mains plug. Ensure that the mains plug remainsaccessible at all times. Unplug the AC power cord from the AC outlet ifthe unit will not be used for several months or more.12 grounding or polarization - This product may be equipped with apolarized alternating-current line plug (a plug having one blade widerthan the other). This plug will fit into the power outlet only one way.This is a safety feature. If you are unable to insert the plug fully into theoutlet, try reversing the plug. If the plug should still fail to fit, contactyour electrician to replace your obsolete outlet. Do not defeat the safetypurpose of the polarized plug.13 power - Cord Protection - Power-supply cords should be routed so thatthey are not likely to be walked on or pinched by items placed upon oragainst them, paying particular attention to cords at plugs, conveniencereceptacles, and the point where they exit from the product.14 outdoor antenna grounding - If an outside antenna or cable systemis connected to the product, be sure the antenna or cable system isgrounded so as to provide some protection against voltage surgesand built-up static charges. Article 810 of the National Electrical Code,ANSI/NFPA 70, provides information with regard to proper groundingof the mast and supporting structure, grounding of the lead-in wireto an antenna discharge unit, size of grounding conductors, locationof antenna discharge unit, connection to grounding electrodes, andrequirements for the grounding electrode.note to catv SYStem inStallerThis reminder is provided to call the CATV system installer’s attention to Section820-40 of the NEC which provides guidelines for proper grounding and, inparticular, specifies that the cable ground shall be connected to the groundingsystem of the building, as close to the point of cable entry as practical.15 lightning - For added protection for this product during a lightningstorm, or when it is left unattended and unused for long periods oftime, unplug it from the wall outlet and disconnect the antenna orcable system. This will prevent damage to the product due to lightningand power-line surges.16 power lines - An outside antenna system should not be located in thevicinity of overhead power lines or other electric light or power circuits,or where it can fall into such power lines or circuits. When installing anoutside antenna system, extreme care should be taken to keep fromtouching such power lines or circuits as contact with them might befatal.17 overloading - Do not overload wall outlets, extension cords, orintegral convenience receptacles as this can result in a risk of fire orelectric shock.18 object and liquid entry - Never push objects of any kind into thisproduct through openings as they may touch dangerous voltage pointsor short-out parts that could result in a fire or electric shock. Never spillliquid of any kind on the product.warning: the apparatuS Should not be expoSed todripping or SplaShing, and objectS filled with liquidS,Such aS vaSeS, Should not be placed on the apparatuS.aS with anY electronic productS, uSe care not to SpillliquidS into anY part of the SYStem. liquidS can cauSe afailure and/or a fire hazard.IMPORTANT SAFETY INSTRUCTIONSENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙT535_eng_OM_v07.indd 2 16/7/07 08:12:15