NAD T755 Owner's Manual

Also see for T755: Specifications Service manual

NAD T755 Owner's Manual Manual pdf 25 page image

DELAYThe availability of +12V DC at Trigger OUT can be regulated. If it is desired that +12V DC is availablewithout delay the moment Trigger OUT is linked to its assigned setting, set Delay to 0s. Otherwise, onecan select through a delay time of 1s to 15s.AUTO TRIGGER INAuto Trigger IN allows external system controllers to toggle the associated section of the T 755 from“Standby” to “On” and vice versa. When the TRIGGER switch at the rear panel is set to ON, a +12V DCinput at Trigger IN will power ON the section where Trigger IN is assigned,Main: From standby mode, the T 755 is powered ON when +12V DC is applied at Trigger IN.Zone 2: Zone 2 is turned ON whenever +1 2V DC is present at Trigger IN.All: Main and Zone 2 as described above will all be activated given a +12V DC input at Trigger IN.WARNINGIf Auto Trigger IN at Trigger Setup menu is assigned to “Main” or “All” and the TRIGGER switch is setto “AUTO” mode, the Power button in the front panel as well as the corresponding ON/OFF functionkeys in the HTR 3 remote control will be disabled effectively handing this function to an externalcontroller. Switch TRIGGER to “OFF” to maintain normal power ON/OFF function procedures.See also item “2. +12 V TRIGGER OUT, TRIGGER IN, TRIGGER AUTO/OFF” of REAR PANEL discussion as wellas the “TRIGGER OUT” discussion under “SOURCE SETUP (NORMAL VIEW)”.LISTENING MODE SETUPThe T 755 has various listening mode options and is mostly configurable. These are provided toreproduce a variety of sound effects depending upon the content of the source to be played. Use acombination of [ ] or ENTER and [ ] keys to configure the following settings.NOTEThe mention of “Back” speakers refer to your external amplifier’s corresponding “Back Right” and“Back Left” speakers (if any) as interfaced with the T 755. The Audio PRE- OUT makes it possible touse the T 755 as a pre-amplifier to external power amplifiers for some or all channels.LISTENING MODESThe audio format as detected by the selected Source can be automatically configured and processedthrough the following options:DOLBY DIGITALDolby Digital is the multi-channel digital signal format developed in the Dolby laboratories. Discsbearing the double-D symbol were recorded with up to 5.1 channels of digital signals, reproducing amuch better sound quality, with dynamic and spatial sound sensations that are much better than inthe previous Dolby Surround.A Dolby Digital audio input can be configured relative to its format.2 Channel: If the detected audio is a 2 Channel Dolby Digital signal, you can default it to one ofthe following settings – Pro Logic, PLIIx Movie, PLIIx Music or None.Surround: If the detected audio is a Surround Dolby Digital signal, you can default it to one of thefollowing settings –Surround EX, PLIIx Movie, and PLIIx Music, Stereo Downmix or None.None: If “None” is selected, the Dolby Digital format will follow the “Digital” setting set forth at“Other” option under this menu section. See discussion below about “OTHER”.OPERATIONUSING THE T 755 –SETUP MENU5ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ