NAD T755 Owner's Manual
Also see for T755: SpecificationsService manual
                                          | |
Contents
| 
SLEEP MODEThe Sleep Mode timer will switch the T 755 to Standby mode automaticallyafter a preset number of minutes. Pressing the HTR 3’s SLEEP button oncewill display the setting of the sleep time increment. Pressing the HTR 3’sSLEEP button a second time within a 3-second period will change thesleep time increment in 15-minute intervals, after which time the T 755 willautomatically switch into Standby mode.To adjust the sleep delay, press the HTR 3’s SLEEP button twice; first todisplay the sleep time increment, and a second time to change thesleep time increment. The sleep time increment and a “SLEEP” icon willcontinuously display on the T 755’s front panel Vacuum Fluorescent Display(VFD). Each consecutive press increases the sleep time in 15-minuteincrements from 15 to 90 minutes. To cancel the sleep mode, continuepressing the HTR 3’s SLEEP button until “SLEEP OFF” displays on the VFD.Switching the T 755 to standby from either the HTR 3’s OFF or the T 755’sPOWER button will also cancel the sleep modeUSING THE ZR 4 REMOTE CONTROLThe ZR 4 remote control is a discrete compact remote for controlling theT 755 from various rooms other than the main room. The ZR 4 remoteallows full separate control of the source selection irrespective to the mainroom. This means the zone input may be completely different, audio andvideo, from the main input and thus corresponding volume levels as well.If one wishes to enjoy the same source, as the main room the ZR 4 remotehas a [LOCAL] button to allow simultaneous listening, but with full separatevolume levels.To mute the Zone Volume level, press [MUTE] on the ZR 4. If the “Zone Controls”OSD menu is ON, the Zone “Volume” level section will display “Mute”.The T 755’s front florescent display will show activity of the zone controlso that main room occupants are aware of the zone remote activity.Furthermore if there is no main room activity, only the zone indicator willbe active in the T 755’s fluorescent display.NOTEThe ZR 4 remote control will only control Zone 2 applications. The HTR 3’s“CUSTOM” device is also defaulted to Zone 2 remote control codes.OPERATIONUSING THE HTR 3 REMOTE CONTROL9ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ |
Related manuals for NAD T755
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine