NAD T785 HD Owner's Manual

Also see for T785: Catalog Specification sheet Owner's manual Specifications Owner's manual

NAD T785 HD Owner's Manual Manual pdf 41 page image

IDENTIFICATION OF CONTROLS• Top section features ON/OFF buttons and back-light LCD display.• Upper section has eight DEVICE SELECTOR keys including one programmable CUSTOM DEVICESELECTOR key and an additional MACRO button function key.• The upper middle section with channel, volume, MUTE, and surround mode buttons.• Middle section has DVD, BD, CD, TUNER and OSD navigation buttons.• Lower middle section has number buttons 0 to 9, A/V PSET, SPEAKER and CD functions, DVD/BDSETUP, and receiver’s TEST and DELAY buttons.• Lower section has DVD, BD and CD transport buttons, receiver audio function keys as well as DVDresolution button.• Bottom section with CHANNEL VOLUME trimming buttons.INTRODUCTIONThe HTRC 1 is like having eight virtual remote controls in one. The eight DEVICE SELECTOR keys can beused to switch between the different virtual remote controls or devices.When the HTRC 1 is idle, the name of the currently selected device will be shown on the first line of theLCD display. Whenever a function key is pressed, the name of that function will be shown on the secondline of the LCD display. The second line will be cleared again shortly after releasing the function key.HIGHLIGHTS• Controls up to 8 Devices.• 2-line LCD display indicates selected Device (DVD) and sent Command (“PLAY”, for example).• Preprogrammed with all NAD remote commands including Zone 2.• Learning function - learns up to 360 commands from other remotes.• Macro operations - program up to 52 Macros with as many as 64 commands each to automatecommonly used command sequences.• Punch Though Operations permit easy access to commonly used functions without reselecting adevice.• Full illumination with light sensor and adjustable time out for easy operation in low lightconditions.• Can generate IR signals with a carrier frequency up to 500 kHz (B&O® compatible).• Mini USB PC Interface allows programming from a Personal Computer.The HTRC 1 is already preprogrammed with a full complement of NAD commands on its AMP DEVICESELECTOR page, and with library commands to operate most NAD DVD, CD and TUNER componentson the corresponding DEVICE SELECTOR keys. These default commands are permanent: Even if youteach the HTRC 1 new commands to take their place, the underlying library commands remain inplace and can easily be recalled should you add an NAD component to your system later.GETTING FAMILIAR WITH THE HTRC 1The HTRC 1 is divided into three main sections. The LCD display section at the top of the handset, theDEVICE SELECTOR, and the remaining 44 Control keys.Eight DEVICE SELECTOR keys at the top; AMP, TV, CUSTOM, CD, DVD, BD, TUNER, and CABLE/SATdetermine which component the remaining 44 control keys will operate. A DEVICE SELECTOR keydetermines what component the HTRC 1 will command; with factory defaults, it does not perform anyfunction on the T 785. The DEVICE SELECTOR keys are organized into three vertical rows of 3 buttonseach; the row on the left are all Audio devices, the row in the center are all Video devices.Both the DEVICE SELECTOR and function keys can “learn” control codes from virtually any infraredremote controller, allowing you to teach the codes of your equipment, regardless of brand, to theHTRC 1. All of the function keys on the AMP DEVICE SELECTOR are preprogrammed to control NADamplifiers, preamplifiers, and receivers. (The HTRC 1 can also command many other NAD components,from its DVD, BD, CD, TUNER and TV pages.)Since HTRC 1 Control keys can perform different functions, depending on the selected DEVICESELECTOR key, the HTRC 1 uses color coding to indicate the function of the function keys whendifferent device keys are chosen. Thus, the colour of the DEVICE SELECTOR key-labeling corresponds tothe labeling of the function keys (similar to a calculator).OPERATIONUSING THE HTRC 1 REMOTE CONTROL41ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ