NAIM UnitiQute 2 Reference Manual

Also see for SUPERUNITI -: Connection guide Guide Supplement Manual Quick start guide Quick start guide

NAIM UnitiQute 2 Reference Manual Manual pdf 22 page image

20Note: As with any wireless network hardware, connectionreliability will be affected by both network routerperformance and Wi-Fi signal quality. To minimise thepossibility of poor connection reliability, Uniti Seriesproducts should be connected to network audio sourcesby no more than one wireless “leg”. Other “legs” necessarybetween a Uniti Series product and the network audiosources should be wired.Note: Uniti Series products cannot connect to a “hidden”wireless network.If the selected network is secureand requires a password to join, analert message will display. Pressingthe handset ok/list key will thenopen a text entry screen for entry ofthe password.Use the handset numeric/text keysto enter the password taking careto ensure that the letter case iscorrect. Press the handset ok/listkey when text entry is complete. Inthe illustration the password is “flatfish”.If the network is successfully joineda confirmation screen will display.If an incorrect password is enteredan alert message will display.Note: Some routers may alsorequire a MAC address to beentered before allowing UnitiSeries products to join a wirelessnetwork. This type of securityfeature is known as ‘MAC address filtering’. Uniti Seriesproduct MAC addresses are shown in both their NetworkSettings and Factory Settings menus.Note: The wireless password key is created when thewireless router is first set up and could be a word ora series of numbers and letters. If the password is notknown, check on the router settings page or with theperson who initially set up the router.Note: If a router offers multiple security configurations,only the most secure one will be offered.Note: If WEP security is used the router should be set to“auto” or “open” authentication.If the selected network is insecureand requires no password, an alertmessage will display. Pressing thehandset ok/list key will immediatelyconnect your Uniti Series product to the network anddisplay a confirmation screen.Note: Wireless connection difficulties can sometimes beresolved by changing the wireless connection channel inthe router settings.4.7.2 Non-DHCP (Static)Network ConnectionIf DHCP is de-selected in theNetwork Settings menu, five furtherparameters will be displayed.Parameter OptionsIP: User definable (numerical entry)Mask: User definable (numerical entry)Gateway (Gtwy): User definable (numerical entry)DNS1: User definable (numerical entry)DNS2: User definable (numerical entryThese settings enable a Uniti Series product to connectto a network using a fixed IP address. On selecting eachone in turn, numerical entry screens will be displayed thatrequire completion with the appropriate network IP addresssettings. Consult your network router’s user documentationfor help with specifying fixed IP address settings.4.8 The Front Display MenuThe Front Display setup menuenables the behaviour of the frontpanel display, logo illumination,clock display and logo-touchmuting to be modified. The optionsare tabulated and described in the following section:Parameter OptionsOff During Mute: Yes / NoAuto Off: Select from listClock When Off: Yes / NoLogo Off: If Muted / If Display Off /Always /NeverLogo Mute: Yes / NoNote: Logo-touch muting and illumination options are onlyavailable on the UnitiQute 2 and SuperUniti.When Off During Mute is selected the front panel displaywill switch off when mute is engaged. Auto Off defines thelength of time the display will remain switched on afterthe last interface operation is carried out. Time periods ofbetween 10 seconds and 1 hour can be selected.Note: If the display has been switched off using thehandset disp key this setting will take priority over theAuto Off setting. The display will always switch on brieflywhen control commands are received.Network Settings 1/54IP: 192.168.0.80Mask: 255.255.255.0Gtwy: 192.168.0.1DNS1: 192.168.0.1This wireless network isinsecure and requires nopassphrase or access key.Press OK To ConnectFront Display 1/54Off During Mute: NoAuto Off: 2 minsClock When Off: YesLogo Off If Muted4. ConfigurationNow enter your wirelesspassphrase or access key.Press OK to continueflatfish abcflatfish|Press OK to confirmConnectedPress OK To FinishCan’t LoginPress OK To Re-Try