NAPCO Security Command Center Operating Manual
Also see for SECURITY COMMAND CENTER: Operating guide
Contents
|
40NAPCO LIMITED WARRANTYNAPCO SECURITY SYSTEMS, INC. (NAPCO) warrants its products to be free from manufacturingdefects in materials and workmanship for thirty-six months following the date of manufacture. NAPCO will,within said period, at its option, repair or replace any product failing to operate correctly without charge tothe original purchaser or user.This warranty shall not apply to any equipment, or any part thereof, which has been repaired by others,improperly installed, improperly used, abused, altered, damaged, subjected to acts of God, or on which anyserial numbers have been altered, defaced or removed. Seller will not be responsible for any dismantling orreinstallation charges.THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THEDESCRIPTION ON THE FACE HEREOF. THERE IS NO EXPRESS OR IMPLIED WARRANTY OFMERCHANTABILITY OR A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.ADDITIONALLY, THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THEPART OF NAPCO.Any action for breach of warranty, including but not limited to any implied warranty of merchantability, mustbe brought within the six months following the end of the warranty period.IN NO CASE SHALL NAPCO BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTALDAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, EVEN IFTHE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT.In case of defect, contact the security professional who installed and maintains your security system. Inorder to exercise the warranty, the product must be returned by the security professional, shipping costsprepaid and insured to NAPCO. After repair or replacement, NAPCO assumes the cost of returningproducts under warranty. NAPCO shall have no obligation under this warranty, or otherwise, if the producthas been repaired by others, improperly installed, improperly used, abused, altered, damaged, subjectedto accident, nuisance, flood, fire or acts of God, or on which any serial numbers have been altered,defaced or removed. NAPCO will not be responsible for any dismantling, reassembly or reinstallationcharges.This warranty contains the entire warranty. It is the sole warranty and any prior agreements orrepresentations, whether oral or written, are either merged herein or are expressly canceled. NAPCOneither assumes, nor authorizes any other person purporting to act on its behalf to modify, to change, or toassume for it, any other warranty or liability concerning its products.In no event shall NAPCO be liable for an amount in excess of NAPCO's original selling price of the product,for any loss or damage, whether direct, indirect, incidental, consequential, or otherwise arising out of anyfailure of the product. Seller's warranty, as hereinabove set forth, shall not be enlarged, diminished oraffected by and no obligation or liability shall arise or grow out of Seller's rendering of technical advice orservice in connection with Buyer's order of the goods furnished hereunder.NAPCO RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY TESTED WEEKLY.Warning: Despite frequent testing, and due to, but not limited to, any or all of the following; criminaltampering, electrical or communications disruption, it is possible for the system to fail to perform asexpected. NAPCO does not represent that the product/system may not be compromised or circumvented;or that the product or system will prevent any personal injury or property loss by burglary, robbery, fire orotherwise; nor that the product or system will in all cases provide adequate warning or protection. Aproperly installed and maintained alarm may only reduce risk of burglary, robbery, fire or otherwise but it isnot insurance or a guarantee that these events will not occur. CONSEQUENTLY, SELLER SHALL HAVENO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE, OR OTHER LOSS BASED ON ACLAIM THE PRODUCT FAILED TO GIVE WARNING. Therefore, the installer should in turn advise theconsumer to take any and all precautions for his or her safety including, but not limited to, fleeing thepremises and calling police or fire department, in order to mitigate the possibilities of harm and/or damage.NAPCO is not an insurer of either the property or safety of the user's family or employees, and limits itsliability for any loss or damage including incidental or consequential damages to NAPCO's original sellingprice of the product regardless of the cause of such loss or damage.Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion orlimitation of incidental or consequential damages, or differentiate in their treatment of limitations of liabilityfor ordinary or gross negligence, so the above limitations or exclusions may not apply to you. ThisWarranty gives you specific legal rights and you may also have other rights which vary from state to state.NAPCO Security Systems, 333 Bayview Avenue, Amityville, NY 11701 DESIGN PATS. PENDINGTHE FOLLOWING STATEMENT IS REQUIRED BY THE FCC.This equipment generates and uses radio-frequency energy and, if not installed and used properly, thatis, in strict accordance with the manufacturer's instructions, may cause interference to radio andtelevision reception. It has been type tested and found to comply with the limits for a Class-B computingdevice in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designedto provide reasonable protection against such interference in a residential installation.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: reorient the receiving antenna; relocate the computer with respect to the receiver;move the computer away from the receiver; plug the computer into a different outlet so that computerand receiver are on different branch circuits.If necessary, the user should consult the dealer or an experienced radio/television technician foradditional suggestions. The user may find the following booklet prepared by the FederalCommunications Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems”.This booklet is available from the U.S. Government Printing Office, Washington, DC 20402; Stock No.004-000-00345-4. |
Related manuals for NAPCO SECURITY COMMAND CENTER
NAPCO F-64TPG Operating Manual
NAPCO MAGNUM 825 Operating Manual
NAPCO ALERT-850 Operating Manual
NAPCO Gemini GEM-X255 Operating Manual
NAPCO FREEDOM F-64TP Operating Manual
NAPCO MAGNUM ALERT-725 Operating Manual
NAPCO Magnum Alert 800 Operating Manual
NAPCO Magnum Alert-850 Operating Manual
NAPCO MAGNUM ALERT-800 Operating Manual
NAPCO MAGNUM ALERT-825 Operating Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine