NAPCO Security Command Center Operating Manual

Also see for SECURITY COMMAND CENTER: Operating guide

Contents

NAPCO Security Command Center Operating Manual Manual pdf 6 page image

6A R M I N G AW A Y : S E T T I N G T H E AL A R M W H E N L E AV I N GZ O N E S F A U L T E D0 2 B A C K D O O RB Y PA SS ED B Y P A S S E DB Y PA SS ED 0 2 B A C K D O O RArming the System1 Check the keypad. The green STATUS light must be on in order to arm. If thegreen light is off, “ZONES FAULTED” will display in the window followed by thenumber and description of each faulted zone. Note each problem zone andsecure it by closing a window, door, etc. When all zones are secure, the greenSTATUS light will come on and the window will display “SYSTEM READY”.2 Arm the system. Enter your code and press Q. The green STATUS light willgo off, the red ARMED light will come on and the window will display “EXIT TIMEXXX”, “PLEASE LEAVE NOW” (where “XXX” represents the exit time remaining,in 10-second steps). Note: If you enter a wrong code, the keypad will display“INVALID ENTRY, TRY AGAIN”.3 Leave the premises. Leave through the exit door before exit time expires.Priority ArmingIf you attempt to arm with a faulted Zone, a 3-second tone will sound at the keypad.“CAN'T ARM SYSTEM” and “ZONES FAULTED”, will display in the window,indicating that the faulted zone(s) must be secured before the panel can be armed.Selectively Bypassing ZonesIf you cannot locate or repair the problem yourself, call for assistance. If you cannotget immediate help, bypass the problem zone(s) from the system by pressing B,then the zone number (or vice versa).Note: Bypassed zones are unprotected. If armed with zones bypassed, be sure tohave the system checked as soon as possibleE X I T T I M E 0 6 0P L E A S E L E A V E N O WCAN’T ARM SYSTEMZONES FAULTEDZ O N E S F A U L T E DSYSTEM READY0 2 B A C K D O O RBYPASSED B Y P A S S E DBYPASSED 0 2 B A C K D O O R