NARDA AMS-8063 Series User Manual

Contents

NARDA AMS-8063 Series User Manual Manual pdf 18 page image

1-10 General InformationTable 1-3 Technical specifications of the EHP-8063 Electric and Magnetic Field AnalyzerElectric Field Magnetic FieldMode AMagnetic FieldMode BFrequency range 9 kHz ÷ 30 MHz 9 kHz ÷ 3 MHz 300 kHz ÷ 30 MHzMeasurement range @10kHz RBWwith preamplifier ON0,1 ÷ 1000 V/m0,02 ÷ 200 V/m30 mA/m ÷ 300 A/m6 mA/m ÷ 60 A/m3 mA/m ÷ 30 A/m0.6 mA/m ÷ 6 A/mDynamic range > 80 dBResolution 0.01 V/m 1 mA/m 0.1 mA/mSensitivity @10kHz RBW (*)with preamplifier ON0.1 V/m0.02 V/m30 mA/m6 mA/m3 mA/m0.6 mA/mFlatness0,5 dB100 kHz – 27 MHz@ 20 V/m0,8 dB150 kHz – 3 MHz@ 166 mA/m0,8 dB300 kHz – 27 MHz@ 53 mA/mAnisotropicity @1MHz 0.8 dBLinearity @1MHz 0,5 dB from FS to –60 dBFSSPAN 9 kHz to FULL SPANRBW 1 kHz – 3 kHz – 10 kHz – 30 kHz – 100 kHz – 300 kHzRejection to E fields --- > 20 dBRejection to H fields > 20 dB ---Calibration internal E2PROMTemperature error 0,02 dB/°CDimensions 92 x 92 x 109 mmWeight 550 gPreamplifier selectable ON/OFF, 14dBUnits V/m, A/mInternal battery 1,2 V x 3 Ni-Mh, rechargeableFirmware updating through PC connectionSelf-test automatic at power onOperating temperature -20 to +55°CStorage temperature -20 to +70°C(*) The maximum sensitivity is achieved with the filter to 10 kHz1.8 Support pole The supplied support pole is used to position the EHP-8063 field analyzerfar from the data transmission/power supply devices and the operatoravoiding any alteration of the field to be monitored.The support pole is fixed to the baseplate and to the EHP-8063 plexiglassbracket.The support pole has been specifically designed to preventinfluencing the field measurements.