NARDA AMS-8063 Series User Manual

Contents

NARDA AMS-8063 Series User Manual Manual pdf 19 page image

Installation and use 2-12 - Installation and use2.1 Introduction This section provides the information necessary to install and use the AMS-8063 Area Monitoring System.It also includes information regarding initial inspection, power requirements,interconnections, working environment, assembly, cleaning, storage andshipment.2.2 Initial inspection Inspect the package for any possible damageIf the packaging or protective material are damaged, check that thecontent is complete and that the instrument has not been damaged inany of its electrical or mechanical parts. Check the accessories,referring to the checklist enclosed with the manual. Report anynoticed damage to the forwarder and to NARDA.2.3 Working environment The working conditions for the instrument are as follows:• Temperature• Relative humidityFrom -20°C to +50°C< 95%The instrument should be stored in a clean, dry place free of acids, dustand moistureThe storage environment must have the following specifications• Temperature• Relative humidity• AltitudeFrom -20°C to + 70°C< 99%Up to 4000 m (a.s.l.)2.4 Return for repairs Any part of the instrument, including the batteries, can only be replaced byNARDA, therefore, in case of damage to parts and/or malfunctions, contactthe NARDA service center.When the instrument has to be returned to NARDA for repairs, pleasecomplete the form included in this User’s Manual, filling in all theinformation necessary for the service requested.To reduce the time necessary for the repair, be as specific as possible indescribing the malfunction. If the problem only occurs under specificconditions, detail in the best possible way how to reproduce theseconditions.Whenever possible, it is preferable to use the original packing for return,making sure to wrap the device in heavy paper or plastic (see section 6 fordetailed packaging instructions). In alternative, pack the equipment in asturdy cardbox with plenty of impact absorbing material all around theequipment, to ensure a tight fit and prevent it from moving inside the box.Take special precautions to protect the solar cells and GSM modemantenna. Seal the package securely and write FRAGILE on the outside toencourage careful handling.1Document AMS8063EN-11107-1.23 - © NARDA 2021