NCT BNC-446 Operation Manual
                                                                                               | |
Contents
| 
BNC-446CNC LATHEOPERATION MANUALNCT Ipari Elektronikai Kft. 5/95 Date: 08.10.2015H-1148 Budapest, Fogarasi út 7.Tel.: +36 1 467 6300www.nct.hu1. SAFETY INSTRUCTIONSWARNING!|Do not install, operate, or service this machine until:1. You have read and understand the safety instructions on the pages that follow.2. You have read and understand the operator’s manual, especially knowing the function andlocation of all machine controls and read manuals for any related accessories.3. You have read and understand all safety and instruction plates attached to the machineand its related accessories.4. Prior to install or service the machine read and understand the maintenance manual.5. To service the machine must be done only by competent and trained personnel.NOTICE!The following safety instructions are general recommendations for most common operationson a turning machine.Additional safety measures may be required for your particular application. Buffalo,therefore, makes no warranty or representation as the absolute correctness of sufficiency ofthe instructions.1.1. General Safety Instructions for Operating the Machine1. The best defence against injuries on a turning machine is to be alert. Never initiate amachine function unless you completely understand what the function will causethe machine to do.2. Never operate the machine with any cover or shield opened or removed.3. Never reach into the work area when the spindle is rotating or if the machine is inautomatic mode.4. Put the machine in manual mode and be sure last programmed function has beencompleted before reaching inside of the work area.5. The functions of the machine make it impossible to eliminate all pinch points.Be particularly aware of the following pinch points:Spindle and chuck rotationIndexing of turret and toolsCarriage and cross-slide movementTailstock movement, both quill and body6. Keep machine and area around it clean and well lighted. Never allow chips, coolant or oilto remain on the floor. Do not leave loose objects on or around machine.7. Clothing: Wear safety glasses with eye shields at all times. Protect your eyes. Never usea compressed air hose to remove chips from a machine. Never wear loose fitting clothing. Remove all jewelry (rings, watches, necklaces etc.).They can be caught in moving parts of the machine. Gloves are easily caught in moving parts. Take them off before turning the machineon. Always wear safety shoes with steel toes and oil-resistant soles. |
Related manuals for NCT BNC-446
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine