Message Tune VolumeTo change the message tune volume when a message or Email is received:* Press 4 to display the Message volume screen with a volume slider.Press to (Up) increase or to (Down) decrease the volume setting to the level required (the slider moves in direction ofthe corresponding key pressed) or input the number (0-Quiet to 9-Loud) for the volume level.Press Softkey 1 (OK) or (Select/Save) to save the current message tune volume setting and return to the previous menu.Press Softkey 2 (Cancel) to reject any ring volume changes and return to the previous menu, press CLR (Clear/Back) to returnto the previous screen with no changes, or press (End) to exit and return to the Idle screen.Key ToneThe key tone is the DTMF tones that sound when pressing number buttons. To turn key tones on or off:* Press 5 to display the Key tone screen.Press 1 (On) for the tones to sound or press 2 (Off) for no tones to sound and return to the previous menu.Service ToneThe service tone is sounded when traveling into and out of the area where the network provides service. To turn the service tone on oroff:* Press 6 to display the Service tone screen.Press 1 (On) for the tones to sound or press 2 (Off) for no tones to sound and return to the previous menu.VibrateThe phone vibrates when a call is received. To turn vibrate on or off:* Press 7 to display the Vibrate screen.Press 1 (On) for the phone to vibrate or press 2 (Off) for no vibration and return to the previous menu.Backlight* Press 8 to display the Backlight screen.Press (Up) or (Down) navigation key to highlight the preferred brightness (High, Medium, or Low) or power-save andpress (Select) to select the highlighted option.Highlight the Minutes field and input 0 (always Off) to 99 for the length of time before the backlight turns Off. The default value is2 minutes.Press Softkey 1 (OK) to save the backlight settings or press Softkey 2 (Cancel) to reject any changes and return to theprevious menu.O Press (Up) or (Down)navigation key to move the highlightbar to the previous or next item in alist.O Press CLR (Clear/Back) to return tothe previous screen without savingany changes.O Press (End) to exit the screenand return to the Idle screen.34
