Receiving CallsWhen someone calls your number (phone is powered On),l The phone ringer sounds.l The LED (located at the back of the flip cover) flashes. the specified color.l The phone number of the person calling may display on the bottom, left of the screen if the caller ID feature is available andthe caller has activated the feature.l The calling person’s number with a name and a picture (see page ) may display if you have the caller has a phone number,name, and a picture stored in the phonebook.If the caller has withheld their caller ID, the screen provides a message that the number is being withheld.O You also have options for holding and forwarding calls. These options depend on your network and your subscriptionarrangements.Accepting a Call* Press SEND or Softkey 1 (Accept) to connect an incoming call.To use ring silencer or any key to accept a call, refer to page . However, if you already have a call in progress, pressing the anykey function does not apply. With a call in progress, you must press SEND or Softkey 1 (Accept) to answer an incoming call.O If you already have 2 calls in progress (whether active, on hold, or multi-party), a third incoming call can not be acceptedbecause the Softkey 1 (Accept) will not be displayed on the incoming call screen.Rejecting a Call* Press (End/On-Off) or Softkey 2 (Reject) to reject or ignore the call. The call goes automatically to voice mail depending ifvoice mail is available by your service provider.O Do not press END to reject an incoming call if you already have 2 calls in progress.Pressing END with 2 calls in progress does not reject an incoming call but will disconnect a call in progress.If your phone receives a call and you do not answer it, the screen will display the phone number (or the name if stored) of thecaller (if available). This information is stored in the missed calls list. Up to 10 missed calls are stored in this list.O You can set your phone to answer a call when any key is pressed. (See Any Key Answer on page ).29