NEC 535 Manual

Also see for 535: Manual

Contents

Call WaitingDuring a call, another received call is announced by a beep tone in the earpiece and an incoming message on the screen. To usecall waiting from the Call in progress screen when you hear the beep tone:* Press Softkey 1 to answer the new call and automatically place the current call on hold.Finish the conversation and press END to terminate the new call.Press Softkey 1 to retrieve the call on hold.Press Softkey 1 to switch between the two calls.To merge the two calls, press Softkey 2 (see Multi-party calls, on page ).Mute A CallTo mute a call using the Phone function Options menu from the Call in progress screen:* Press MENU (Options Menu) and 2 or press and HOLD (Asterisk Symbol) key to mute the call.Press MENU (Options Menu) and 2 or press and HOLD (Asterisk Symbol) key to un-mute a muted call.When a call is muted and you accept a received call, mute is automatically turned Off. The mute function is automatically releasedwhen a call is ended.DTMF TonesDual tone multi-frequency (DTMF) tones are used to send digital signals to over-the-phone automated services that allow accessto information or accounts, e.g., use a specific language, access to specific information, account number and password to financialaccounts, voice mail, etc. These DTMF tones may be annoying during multi-party calls. You can turn DTMF tone Off to beconsiderate so that the participants do not hear these tones when you input the number of another participant. The tones can onlybe sent when a call is connected.To turn DTMF tones Off from the Call in progress screen (during a phone call):* Press MENU (Options Menu) , 7, and 2.To turn DTMF tones On:* Press MENU (Options Menu) , 7, and 1.35