Preliminary User’s Manual U16898EJ3V0UD330CHAPTER 20 ELECTRICAL SPECIFICATIONS ((T) product, (S) product, (R) product, (A) product)Caution For (A) products, the specifications are target values, and may change after device evaluation.Absolute Maximum Ratings (T A = 25°C)Parameter Symbol Conditions Ratings UnitV DD −0.3 to +6.5 VV SS −0.3 to +0.3 VSupply voltageAV REF −0.3 to V DD + 0.3Note VV I1 P30, P31, P34, P40 to P45, P121 to P123 −0.3 to V DD + 0.3Note VInput voltageV I2 P20 to 23 − 0.3 to AV REF + 0.3Noteand −0.3 to V DD + 0.3NoteVOutput voltage V O −0.3 to V DD + 0.3Note VAnalog input voltage V AN − 0.3 to AV REF + 0.3Noteand −0.3 to V DD + 0.3NoteVPer pin −10.0 mATotal of pins other than P20 to P23 −44.0 mAOutput current, high IOHTotal of P20 to P23 −44.0 mAPer pin 20.0 mAOutput current, low I OLTotal of all pins 44.0 mAIn normal operation modeOperating ambienttemperatureTADuring flash memory programming−40 to +85 °CFlash memory blank status −65 to +150 °CStorage temperature TstgFlash memory programming already performed −40 to +125 °CNote Must be 6.5 V or lowerCaution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for anyparameter. That is, the absolute maximum ratings are rated values at which the product is on theverge of suffering physical damage, and therefore the product must be used under conditions thatensure that the absolute maximum ratings are not exceeded.Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of port pins.
