NEC Conference Max Plus User Manual
Also see for Conference Max Plus: User manualGetting started guide
          | |
NEC Conference Max Plus — User Options 11NEC Conference Max Plus — User Options10Tones and alertsTo program Conference number1. Press and hold REDIAL/PROG until the Program icon appears on the LCD screen.2. Press 5 to enter the Conference menu.3. Press REDIAL/PROG.4. Enter the phone number.Note: To add a pause to the phone number, press and hold the pound (#) key. To add a dashto the phone number, press and hold the 1 key.To add a space to the phone number, press andhold the star key (*).5. Press REDIAL/PROG to save the number. Press CLEAR to exit.Note: If a number has already been programmed, use CLEAR to delete the old numberbefore entering the new number.To program service center number1. Press and hold the REDIAL/PROG key until the Program icon appears on the LCDscreen.2. Press 6 to enter the service center menu.3. Press REDIAL/PROG.4. Enter the number you want the 0 key to dial.Note: To add a pause to the phone number, press and hold the pound (#) key. To add a dashto the phone number, press and hold the 1 key.To add a space to the phone number, press andhold the star key (*).5. Press REDIAL/PROG to save the number. Press CLEAR to exit.Note: If a number has already been programmed, use CLEAR to delete the old numberbefore entering the new number.To program the Automatic Gain Control (AGC)/Automatic Level Control (ALC) settings1. Press and hold the REDIAL/PROG key until the Program icon appears on the LCD screen.2. Press 8 to enter the AGC/ALC menu.The current settingis displayed on the LCD screen.3. Press REDIAL/PROG.The current setting flashes.4. Enter the new setting. Refer to the table at right.5. Press REDIAL/PROG to confirm selection. Press CLEARto exit.Note:The default AGC/ALC setting is 1.To restore factory defaults1. Press and hold the REDIAL/PROG key until the Program icon appears on the LCDscreen.2. Press and hold the 9 key.The number 8 will be displayed across the LCD screen.3. Press REDIAL/PROG to confirm selection. Press CLEAR to exit.Tone/Alert DescriptionNot poweredConfirmationRejectLow BatteryOut of RangePagingIf the base unit is not powered, you will hear a beeping soundwhen you press the Phone key.A tone will play upon successful programming entry.A tone will play if you attempt to do any of the following:• enter an invalid programming entry• use a speed dial key that has not been programmed(One-Touch Conferencing or service center)• enter a 45th digit when predialing• enter a 17th digit for user phone number• enter a 31st digit for speed dial key (One-TouchConferencing or service center)An alert will sound every 60 seconds when batteries requirecharging and conferencing pod is in Phone mode.An alert will sound every 30 seconds when conferencing pod istoo far from base unit and in Phone mode.When the Page button on the base unit is pressed, theconferencing pod will beep loudly for 30 seconds or until anykey on the keypad is pressed.SpeakerAGCMicrophoneALCSetting21 On OnOn Off3 OnOff4 Off Off |
Related manuals for NEC Conference Max Plus
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine