324. Using Menus4-2. Table of adjustment menusMenus in parentheses are menus for our service personnel. Normally, these menus cannot be used.Main menuTitle SelectConfiguration(Title Setup)InformationSubmenu"Title Memory Name"TEST PatternLamp Setup(Setup)(Installation)(Memory)Macro KeyLampMacro KeyUsageError CodeVersionIP AddressMMS StatusAdjustFeedbackDouser ModeTurretExt. MMS LinkPanel Key LockFactoryDefaultImage OrientLens CenterMMS SelectBaudrateDate/Time(New Bulb)(Bulb Warning)(New Lamp House)Bulb AlignmentLampLensMacro Key No.1-8OutputBulb Type [A]Bulb Type [W]Bulb Type [H]Macro Key No.1-8SystemMMS(Built-in)SystemCinemaPC CardDescriptionSelects the title of the signal to be projected.Selects the test pattern to be projected.Adjusts lamp brightness.Sets the lamp brightness constant mode that uses abrightness sensor.Selects whether to use the douser (screen mute) whenswitching signals.Controls the turret mounted with an anamorphic lens.Sets whether to connect an external multi-media switcher (MMS).Locks the buttons on the projector's control panel so thatthey cannot be operated.Returns the settings to their default values (only macro keysand titles, or all settings).Selects the projection method (front/rear).Moves the lens shift position to the center.Selects the multi-media switcher (MMS) to connect.Sets the PC control connector (RS-232C) data transmissionspeed (bps).Sets the date and time on the projector.Resets the lamp bulb usage time and selects or edits newentries (only when the projector is in standby mode).Sets the lamp bulb warning time (only when the projector isin standby mode).Resets the lamp house usage time, and makes settings orselects modes (only when the projector is in standby mode).Sets the lamp bulb alignment.Saves the current lamp setting.Saves the current lens setting.Sets the titles to be assigned to the macro keys of 1 to 8.Displays the lamp output setting.Displays the registered name and the maximum/minimumcurrent setting of the currently used lamp bulb.Displays the registered name and the lamp rated output (kW)of the currently used lamp bulb.Displays the registered name and the lamp bulb warning time(Bulb Warning Time) setting of the currently used lamp bulb.Displays the titles assigned to the macro keys of 1 to 8.Displays the usage times of the projector, lamp bulb, lamphouse and bulb warning.Displays the currently occurring error.Displays the version of the projector head. (BIOS, Firmware,Data, and Serial No.)Displays the version of the built-in multi-media switcher (MMS).(BIOS, Firmware, Data, FPGA, and Serial No.)Displays the SYSTEM IP address.Displays the CINEMA IP address.To display the IP address when a wireless LAN card is set.Displays the link-status of the connected multi-mediaswitcher (MMS).Referencepage33333434----------------3435353535353636363737373737