NEC DLP CINEMA NC2500S User Manual

Also see for DLP CINEMA NC2500S: Specifications Installation manual

Contents

NEC DLP CINEMA NC2500S User Manual Manual pdf 17 page image

91. What’s in the Box? and the Names of the Projector Parts1-3-4. Connection terminalsSDI-A SDI-B DVI-A DVI-B GPI/OLAN-A LAN-BREMOTEIN RS-232C PCCARD USBCINEMASYSTEM1111098762 3 4 51. HDSDI A input terminal (SDI-A) (BNC)Connect a Video Server of Video source to this terminal. Use a 75Ω coaxial cable.2. HDSDI B input terminal (SDI-B) (BNC)Connect a Video Server or Video source to this terminal. Use a 75Ω coaxial cable.3. DVI-D A input terminal (DVI-A) (DVI-D 24P)Connect the DVI-D output terminal of a PC to this terminal. Use a commercially available DVI-D signal cable (Single Link).4. DVI-D B input terminal (DVI-B) (DVI-D 24P)Connect the DVI-D output terminal of a PC to this terminal. Use a commercially available DVI-D signal cable (Single Link).5. External control terminal (GP I/O) (D-Sub 37P)Use this terminal when controlling your projector from an external switcher. (See page 51)6. Remote control input terminal (REMOTE IN) (Stereo mini)Connect the remote control of the projector, using the supplied remote control cable.Memo• The projector’s remote control can be used by connecting with the remote control cable. (See page 14)7. PC control signal switch (CINEMA/SYSTEM)Use this to set data on the projector.8. PC control terminal (RS-232C) (D-Sub 9P)This is used when the service personnel sets the data for the projector or operates the projector from PC via RS-232C. Usea commercially available RS-232C straight cable to connect the projector to the PC.9. PC card slot• Set a wireless LAN card, and you can control the projector from a PC, using a wireless LAN.Please inquire your dealer/distributor about a wireless LAN card that can be used.• Use this slot when doing maintenance on your projector.10. USB port (USB) (type A)Use this port when doing maintenance on your projector.11. Ethernet port (LAN-A, LAN-B) (RJ-45)Use this port when controlling your projector in LAN connection from a PC. Use a commercially available LAN cable(10Base-T/100Base-T) to connect the projector to the PC.