I N S T A L L A T I O N2-30 DT700 User ManualFigure 2.10 AC Adapter ConnectionT o c o n n e c t a h e a d s e t ( O p t i o n a l )Note: There is no connector for a headset on the DT710 (ITL-2E) phone.1 Connect the headset to the phone:a. Insert the headset cord plug into the HEADSET connector on the back of the phone,until you hear a click.b. Thread the cord through the groove, as shown in the figure below.Figure 2.11 Headset ConnectionT o c o n n e c t a c o m p u t e r ( O p t i o n a l )You can connect a computer to the network through the phone using a LAN cable ifthere are a limited number of available ports on your local area network.Note: If a device that is connected through the PC port on the back of the phone ishaving connection issues, contact your system administrator to verify that thePC port is enabled on the phone.1 Insert the LAN cable into PC connector on the back of the phone, until you hear a click.ACAdapterPlugPhoneGrooveAC Adapter CordConnector for AC AdapterGrooveHeadsetCablePhone
