NEC DTR-IR-2 User Manual
Also see for DTR-1R-2: Setup guide
                                            | |
Contents
| 
B a s i c s [ 1 5 ]BAS I C SBasicsMaking and Receiving CallsWith the handset's duplex speakerphone, you can have hands-freeconversations.The icon appears on the display screen during hands-free conversations.You can easily switch a call from normal conversation to hands-freeconversation. To switch a call, press speaker during the call.From the HandsetFrom the HandsetNormal conversation Hands-freeconversationTo answer a callHandset On the CradlePick up the handset (AutoTalk is:on) or pick up the handset andpress talk/flash (AutoTalk is: off).Handset Off the CradlePress any number key, */tone/<,or #/> (Any Key Answer), orpress talk/flash.Handset Off the CradlePress speaker.To make a callHandset Off the Cradle1) Press talk/flash.2) Listen for the dial tone.3) Dial the number.ORDial the number, and then presstalk/flash.Handset Off the Cradle1) Press speaker.2) Listen for the dial tone.3) Dial the number.ORDial the number, and thenpress speaker.To hang up Press end or return the handset to the cradle (AutoStandby).To enter a pausewithin the dialingsequenceWhen you dial the number in standby mode, press the PAUSEsoft key. P appears in the display, which represents a pause.6CNM /76' /'07For best performance talk alternately with the caller in a quiet room.You can decrease the speaker volume if you or the other party hasdifficulty hearing.note• To set "Autotalk", see page 11 or to set "Anykey Answer" see page 12.• The handset microphone is located at the bottom of the handset (see "Controls & Functions" on page 2).Position yourself as near to the handset as possible and speak clearly.note |
Related manuals for NEC DTR-1R-2
manualsdatabase
Your AI-powered manual search engine