Issue 1.0Owner’s Manual 7-213.5.5 Administrator Site Survey SettingsThis setting allows the administrator to initiate a site survey to collectinformation about the handsets.To change the pin code:1. Select Site Survey from the Administrator Setting List.2. Press the Select key.3. On the Site Survey screen, press the Scan key. The results of thescan are displayed on the handset’s LCD.Scan for information:This screen displays the followinginformation:Band - the carrier band for the handset.Condition - Good / Fair / PoorClear Slot - number of clear slots (totalnumber of slots is 12).Number of Base - the number of the basestation.Keys available when requesting a sitesurvey include:Scan key - begins scanning for clear slotsand the number of the associated basestation.Sync key - begins Sync display mode.Scanning begins collecting information (thistakes about 30 seconds).
