NEC EXPRESSSCOPE Engine 3 User Manual

Also see for NEC Express5800 Series: User guide User guide User guide User guide Configuration guide

NEC EXPRESSSCOPE Engine 3 User Manual Manual pdf 56 page image

CONFIRMING SYSTEM INFORMATIONThis section describes how to confirm the system information (product, BIOS/BMC firmwarerevision, MAC address of System LAN, CPU, Memory) through the command line interface.The values of the properties for items not supported by the hostsystem is not displayed for the system information. Moreover, thevalues of the properties for items supported with the host systemmight not be displayed the system information according to a state ofa power supply and mounting such as a device of the system either.Confirming Product InformationYou can confirm the product information through the command line interface by enteringfollowing the basic command at the command prompt.show /admin1/system1In this case, value of oemnec_productname property indicates "Product Name" information atthe "Properties" section. Also value of oemnec_modelnumber property indicates "Part /Model Number" information and value of oemnec_serialnumber property indicates "ProductSerial Number" information. These properties for the product information are read-only.Confirming MAC address of System LANTo move the current default target to /admin1/system1, enter the following command at thecommand prompt.cd /admin1/system1Here, to confirm all the targets for System LAN (onboard LAN), enter the following commandat the command prompt. All the System LAN targets are represented as enetport stringsat "Targets" section. means value of one-origin integer.showNext, when the following command is input, the MAC address of the System LAN target isappeared at the right side of "PermanentAddress=" string. means the number of theSystem LAN target which you would like to confirm.show enetportFor example, enter the following command when you would like to confirm the MAC addressof LAN Port1.show enetport1- 56 -