NEC Enhanced split screen Model Operation Manual

Also see for 50XR4: Supplementary guide Supplementary guide Brochure Specifications Installation guide

NEC Enhanced split screen Model Operation Manual Manual pdf 20 page image

20Setting the color temperatureUse this procedure to set color tone produced by the plasmadisplay.Example: Setting “HIGH”On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”.SEL. ADJ. EXIT RETURNPICTUREPICTURE MEMORYCONTRASTBRIGHTNESSSHARPNESSCOLORTINTNRCOLOR TEMP.GAMMALOW TONESET UP LEVELCOLOR TUNECINEMA MODEPICTURE MODE: OFF: OFF: HIGH: 2.2: AUTO: 0%: ON: NORMALGRInformation Setting the color temperatureLOW: RedderMIDDLE LOW: Slightly redMIDDLE: Standard (slightly bluer)HIGH: BluerAdjusting the color to the desired levelUse this procedure to adjust the white balance for eachcolor temperature to achieve the desired color quality.Example: Adjusting the “GAIN RED” of “HIGH” colortemperatureOn “COLOR TEMP.” of “PICTURE” menu, select “HIGH”,then press the MENU/ENTER button.The “WHITE BALANCE” screen appears.On “GAIN RED”, adjust the white balance.SEL. ADJ. EXIT RETURNWHITE BALANCECOLOR TEMP. HIGHGAIN REDGAIN GREENGAIN BLUEBIAS REDBIAS GREENBIAS BLUERESET : OFF GAIN RED 20Information Adjusting the white balanceGAIN R/G/B: White balance adjustment for white levelBIAS R/G/B: White balance adjustment for black levelRESET: Resets settings to the factory default values.Use and buttons to select “ON”, then press theMENU/ENTER button. Restoring the factory default settingsSelect “RESET” under the WHITE BALANCE menu.Changing the Gamma CurveThis feature adjusts the brightness of the midtone areaswhile keeping shadows and highlights unchanged.Example: Setting “2.3”On “GAMMA” of “PICTURE” menu, select “2.3”.SEL. ADJ. EXIT RETURNPICTUREPICTURE MEMORYCONTRASTBRIGHTNESSSHARPNESSCOLORTINTNRCOLOR TEMP.GAMMALOW TONESET UP LEVELCOLOR TUNECINEMA MODEPICTURE MODE: OFF: OFF: MIDDLE: 2.3: AUTO: 0%: ON: NORMALGRInformation GAMMA settingsThe picture becomes darker as the number increases(in the sequence of 2.1, 2.2, 2.3, 2.4).* These values are approximate.Making the Low Tone adjustmentsThis feature allows more detailed tone to be reproducedespecially in the dark area.Example: Setting “2”On “LOW TONE” of “PICTURE” menu, select “2”.SEL. ADJ. EXIT RETURNPICTUREPICTURE MEMORYCONTRASTBRIGHTNESSSHARPNESSCOLORTINTNRCOLOR TEMP.GAMMALOW TONESET UP LEVELCOLOR TUNECINEMA MODEPICTURE MODE: OFF: OFF: MIDDLE: 2.2: 2: 0%: ON: NORMALGRInformation LOW TONE settingsAUTO: Will automatically appraise the picture andmake adjustments.1: Will apply the dither method suitable for still pictures.2: Will apply the dither method suitable for motionpictures.3: Will apply the error diffusion method.