SSA graphical user interface 205. Select Parity Initialization Method to Rapid and make selections for RAID Level, Number of ParityGroups, Strip Size/Full Strip Size, Sectors/Track, Size, and Caching. Depending on the controller usedand drives selected, your options may appear different from the image below.6. Click Create Logical Drive to continue.A summary page appears.7. Click Finish.Changing the Spare Activation ModeThe spare activation mode feature enables RAID Controller to activate a spare drive under the followingconditions: Predictive Spare Activation: When a data drive reports a predictive failure (SMART) status Failure Spare Activation: When a data drive fails; this mode is the default.In normal operations, RAID Controller starts rebuilding a spare drive only when a data drive fails. With thepredictive spare activation mode, rebuilding can begin before the drive fails, reducing the likelihood of dataloss that could occur if an additional drive fails.Procedure1. Open SSA.For more information, see "Using the SSA GUI."2. Open the Configure panel by doing one of the following:o Choose a device and click Configure in the quick navigation menu.o Select an available device from the Home screen, and then click Configure under the available