GlossaryExpress5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4 Installation Guide (VMware) 85GlossaryTerm DescriptionBIOS Setup Utility (SETUP) Software for setting BIOS. You can run this software by pressing key during POST.BMC Baseboard Management Controller (BMC) is a built-in controller that supports the IPMIversion 2.0 protocol. BMC can manage the server hardware.BMC Configuration Utility Software for setting BIOS or BMC. You can use as Windows application or run thissoftware when pressing key during POST.CPU module A CPU subsystem logically configured in a CPU/IO module. It includes CPUs andmemory.CPU/IO module A module that includes CPUs (processors), memory, PCI boards, a cooling fan, hard diskdrives and power supply units.DUMP Switch A switch that is used for collecting the memory dump if an error occurs. You can specifythe destination of the dump by using the OS function.EXPRESSBUILDER Standard software for setting up the server easily. This also includes several usefulapplications and instruction manuals.EXPRESSSCOPE ENGINE 3 A name of BMC for NEC Express5800 series.Express Report Service Software that can report the server failure to the contact center by E-mail or modem. Thissoftware is installed with NEC ESMPRO Agent to the server.Express Report Service (HTTPS) Software that can report the server failure to the contact center by HTTPS.ExpressUpdate A feature for updating BIOS, firmware, driver, or software of the server. This feature isavailable when NEC ESMPRO Manager cooperates with EXPRESSSCOPE ENGINE 3and ExpressUpdate Agent.ExpressUpdate Agent Software for performing ExpressUpdate. This is installed to the server.Flash FDD An optional USB device that can use as a floppy disk drive.I/O module An I/O subsystem logically configured in a CPU/IO module. It includes hard disk drives,PCI cards, BMC and 1G/10G LAN.NEC ESMPRO Standard software for the server management. This consists of several applications formanaging or monitoring.NEC ESMPRO Agent Software for monitoring the server. This works with NEC ESMPRO Manager and residesas the OS service.NEC ESMPRO Agent Extension Software for performing the scheduled operations. This works with NEC ESMPROManager.NEC ESMPRO Manager Software for managing a number of servers on network.OEM driver A Windows driver for the mass storage device.OS standard installer An installer that stored in Windows installation disc. Use this installer if you want to installthe OS manually.Offline tools Software that can confirm or change IPMI data such as SEL, SDR, or FRU. You can startOffline tools when pressing key during POST.PC for Management A computer for managing the server on network. A general Windows/Linux computer canbe used as "PC for Management".Product Info Collection Utility Software for collecting several hardware/software statuses or event logs. You can easilycollect the data for the server maintenance by using this software.Starter Pack Software package for the server. This software includes the customized drivers forWindows. This must be installed before using Windows on the server.Windows OS parameter file A file that saved settings for installing Windows. You can install with the saved settings inthis file when setting Windows with EXPRESSBUILDER.
