3-2 Configuring Your SystemConfiguring Your SystemConfiguration and setup utilities are used to change your system configuration.You can configure your system, as well as option boards you may add to yoursystem, using the BIOS Setup Utility. Several unique system parameters areconfigured using the BIOS Setup, which is stored in the system FLASHmemory.If your system has been factory configured, the BIOS Setup does not need to berun unless you want to change the password or security features, add certaintypes of option boards or devices, or upgrade your system board.This chapter also provides information on several system configurationparameters that are set by jumpers on the system board. However, theseparameters do not usually require change.Use the E XPRESS BUILDER CD-ROM to create the device driver diskettes.
