Initial SNMP Testing8-30 Express5800/ftServer: System Administrator’s Guide for the Linux Operating SystemOpState:State DefinitionsTable 8-2 lists operation state (OpState) names, SRA-ftLinux-MIB codes, anddefinitions for ftServer systems running a supported Linux distribution togetherwith Express Builder.Table 8-2. Operation State Values, Names, and Definitions (Page 1 of 2)Value Operation State (OpState) Definition1 UNKNOWN The state of a component could not bedetermined.2 EMPTY The component slot does not have acomponent present, or the componentdoes not have power.3 REMOVED A component is present in the slot, butmain power is not turned on and thecomponent is out of service.4 SHOT A component has an error and was takenout of service by system logic. When inthis state, the component is electricallyisolated from the rest of the system.5 BROKEN A component has a problem; anassociated reason (see OpState: Reason)describes the problem. This is a terminalstate; some user action must occur tochange this state. User actions that causea transition out of the BROKEN stateinclude bringing the component up ordown, or removing the component.6 DUMPING A CPU-I/O enclosure is recovering crashdump information.7 DIAGNOSTICS A component is running diagnostics.8 DIAGNOSTICS_PASSED A component has passed diagnostics.9 INITIALIZING Software is preparing a device to bebrought online.11 FIRMWARE_UPDATE Board firmware code is being updated.12 FIRMWARE_UPDATE_COMPLETE Board firmware code is updated.14 OFFLINE The unit has been brought down.15 STOPPED The driver has stopped the component;the component is no longer running.
