Initial SNMP Testing8-32 Express5800/ftServer: System Administrator’s Guide for the Linux Operating SystemGET and SET Operations for ftlSNMP MIB ObjectsSee the SRA-ftLinux-MIB.txt file for information on objects that have GET and SEToperations. Table 8-4 lists the operations.SRA-ftLinux-MIB OID Values and PropertiesThe SRA-ftLinux-MIB file contains all ftlSNMP defined object identifiers, andassociated operation classes and properties, with some notes inserted to assist you.You can grep through the SRA-ftLinux-MIB.txt file for information about OID valuesand properties or open it with an editor or browser to view and search for information.The default installation places SRA-ftLinux-MIB at/opt/ft/mibs/SRA-ftLinux-MIB.txt.13 FIRMWARE_PROM_ERROR Could not write to the firmware PROM.14 AUTOBURN_DISABLED Cannot match a new enclosure’s BIOS orfirmware with that of the existing enclosure.16 PRIMARY With duplex devices, this indicates that thespecific device is primary in the pair.17 SECONDARY With duplex devices, this indicates that thespecific device is secondary in the pair.Table 8-4. Set Operations Currently Implemented in ftlSNMPOperationftcCpubdBurnFirmware ftcIobdInitiateBringUpftcCpubdClearMTBF ftcIobdSetMTBFThresholdftcCpubdInitiateBringDown ftcIobdSetMtbfTypeftcCpubdInitiateBringUp ftcEtherClearMTBFftcCpubdSetCPUBoardPriority ftcEtherSetMTBFThresholdftcCpubdSetMTBFThreshold ftcEtherSetMtbfTypeftcCpubdSetMtbfType ftcScaClearMTBFftcIobdClearMTBF ftcScaSetMTBFThresholdftcIobdInitiateBringDown ftcScaSetMtbfTypeTable 8-3. Reason Codes, Names, and Definitions (Page 2 of 2)Code Reason Definition
