NEC HT1100 User Manual

Also see for Showcase Series HT1100: Control commands Command guide Command guide Control commands Compatibility chart

Contents

NEC HT1100 User Manual Manual pdf 11 page image

E-11INSTALLATION AND CONNECTIONSThis section describes how to set up your projector and how to connect video and audio sources.Your projector is simple to set up and use. But before you get started, you must first:zSet up a screen and the projector.xConnect your video equipment to the projector. See page E-13 – 17.cConnect the supplied power cable. See page E-17.NOTE: Ensure that the power cable and any other cables are disconnected before moving the projector. Whenmoving the projector or when it is not in use, cover the lens with the lens cap.Setting Up the Screen and the ProjectorSelecting a LocationThe further your projector is from the screen or wall, the larger the image. The minimum size theimage can be is approximately 30" (0.8 m) measured diagonally when the projector is roughly 4 feet(1.0 m) from the wall or screen. The largest the image can be is 200" (5.08 m) when the projector isabout 23 feet (7 m) from the wall or screen. Use the drawing below as a guide.406.4(W) X 304.8(H)/160"(W) X 120"(H)365.8(W) X 274.3(H)/144"(W) X 108"(H)304.8(W) X 228.6(H)/120"(W) X 90"(H)243.8(W) X 182.9(H)/96"(W) X 72"(H)203.2(W) X 152.4(H)/80"(W) X 60"(H)162.6(W) X 121.9(H)/64"(W) X 48"(H)121.9(W) X 91.4(H)/48"(W) X 36"(H)81.3(W) X 61.0(H)/32"(W) X 24"(H)61.0(W) X 45.7(H)/24"(W) X 18"(H)Screen size (Unit: cm/inch)Lens centerScreen sizeDistance (Unit: m/feet)1.3/4.32.0/6.62.7/8.93.4/11.24.1/13.55.2/17.16.2/20.346.9/22.61.0/3.3200"180"150"120"100"80"60"40"30"NOTE: The above shows the throw distance for 4:3 screen.