NEC HT1100 User Manual

Also see for Showcase Series HT1100: Control commands Command guide Command guide Control commands Compatibility chart

Contents

NEC HT1100 User Manual Manual pdf 30 page image

E-30DeinterlaceTurns on or off the deinterlace function.On .................. Default standard setting.Off .................. Select this option if there are some jitter or artifacts invideo.NOTE: This feature is not available for Scart, 480p, 576p, and non-1080i HDTVand RGB signals.Telecine (available only when "Deinterlace" is on)Use 3:2 pull down correction to eliminate jitter and artifacts in video.Auto ............... For film source such as a DVD player.Off .................. For signals other than film sources.Black ExpansionMinimizes blacks that appear more like shades of gray to provide atrue black and white image at high contrast.Off/1/2/3/4/5NOTE: This feature is not available for Scart, 480p, 576p, HDTV and RGBsignals.Contrast EnhancementThis option allows you to provide a high contrast image in a brightscene.–3/–2/–1/Off/1/2/3NOTE: This feature is available for TV standard signals only.Image [Page 1]Selecting Aspect Ratio [Aspect Ratio] (not available for Viewer)Aspect Ratio allows you to select the best Aspect mode to display yoursource image.When screen size 4:3 is selected for the source, the following selectionswill display:Normal ........... Standard 4:3 Aspect.Zoom ............. All 4 sides stretched.Cinema .......... Top and bottom reduced to display with black bor-ders on top and bottom. Available for 4:3 signals only.V-Zoom .......... Top and bottom stretched. Available for 4:3 signalsonly.When screen size 16:9 and Anamorphic are selected for the source,the following selections will display:Normal ........... 16:9 image displayed in 4:3 mode.Full ................. Stretched to display in 16:9 aspect ratio. Available for16:9.Zoom ............. All 4 sides stretched.Stadium ......... Non-linearly stretched. Available for 16:9 only.NOTE: You can adjust image positions vertically for source with black borders.See page E-23 for setting image positions.CopyrightPlease note that using this projector for the purpose of commercialgain or the attraction of public attention in a venue such as a coffeeshop or hotel and employing compression or expansion of the screenimage with an "Aspect Ratio" or "Screen" setting may raise concernabout the infringement of copyrights which are protected by copy-right law.NOTE: During 3D Reform adjustment, "Aspect Ratio" may not be available.Should this happen, first reset the 3D Reform data and then do setting again.Second repeat the 3D Reform adjustment.Changing the aspect ratio can limit 3D Reform in its adjustable range.