NEC LCD2690WUXI2-BK - MultiSync - 26" LCD Monitor User Manual

Also see for LCD2690WUXI2: User manual Specification Product dimensions

Contents

NEC LCD2690WUXI2-BK - MultiSync - 26" LCD Monitor User Manual Manual pdf 10 page image

English-8ControlsOSD (On-Screen Display) control buttons on the front of the monitor functionas follows:To access OSD menu, press the MENU button.To change signal input, press the SELECT button.NOTE: OSD must be closed in order to change signal input.* The “LEFT/RIGHT” and “UP/DOWN” buttons functionality is interchangeable depending on the orientation(Landscape/Portrait) of the OSD.SETTING OSD LANGUAGE• Set the OSD language before using OSD functions.• To access the “LANGUAGE SELECTION” menu, press control key (LEFT/RIGHT or UP/DOWN or MENU).• Press the LEFT/RIGHT or UP/DOWN buttons to select the desired OSD language.• To exit from this OSD menu, press EXIT button.NOTE: Setting the OSD language is only necessary upon initial setup. The OSD language will stay the same until changedby the user.Detects the level of ambient lighting allowing the monitor to make adjustments to varioussettings resulting in a more comfortable viewing experience. Do not cover this sensor.Turns the monitor on and off.Indicates that the power is on.Can be changed between blue and green in the Advanced OSD Control menu.Enters the OSD Control menu. Enters OSD sub menus.Changes the input source when not in the OSD Control menu.Access OSD menu. Exits the OSD sub menu. Exits OSD Control menu.Navigates to the left or right through the OSD Control menu. You can adjust the brightnessdirectly (HotKey function ON), while the OSD menu is off.Navigates up or down through the OSD Control menu. You can adjust the contrast directly(HotKey function ON), while the OSD menu is off.Resets the OSD back to factory settings.When pressed RESET when OSD is not showing, you can select “PICTURE MODE” (page 26),“ECO MODE” (page 9) and “RESPONSE IMPROVE” (page 22) directly.The Key Guide appears on screen when the OSD control menu is accessed.The Key Guide will rotate when the OSD control menu is rotated*.1 AMBIBRIGHT SENSOR2 POWER3 LED4 INPUT/SELECT5 MENU/EXIT6 LEFT/RIGHT7 UP/DOWN8 RESET9 KEY GUIDE1 2 3 4 5 6789LandscapePortrait