NEC LCD2690WUXI2-BK - MultiSync - 26" LCD Monitor User Manual

Also see for LCD2690WUXI2: User manual Specification Product dimensions

Contents

NEC LCD2690WUXI2-BK - MultiSync - 26" LCD Monitor User Manual Manual pdf 14 page image

English-12OSD LOCK OUTThis control completely locks out access to all OSD control functions. When attempting to activate OSD controlswhile in the Lock Out mode, a screen will appear indicating the OSD controls are locked out.There are four types of OSD LOCK OUT:OSD LOCK OUT with BRIGHTNESS and CONTRAST control: To activate the OSD Lock Out function, pressSELECT, then “UP” button and hold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then“UP” button and hold down simultaneously while in the OSD menu. BRIGHTNESS and CONTRAST can be adjustedwhile in this lock out mode.OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT, then “Right” button andhold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then “Right” button and hold downsimultaneously while in the OSD menu. No controls can be adjusted while in the lock out mode.OSD LOCK OUT with BRIGHTNESS (only) control: To activate the OSD Lock Out function, press SELECT, then“Down” and “Left” buttons and hold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then“Down” and “Left” buttons and hold down simultaneously while in the OSD menu. BRIGHTNESS can be adjustedwhile in this lock out mode.CUSTOM: Refer to the Advanced OSD Menu.OSD TRANSPARENCYAdjusts the transparency of the OSD Menu.OSD COLOR“Tag window frame color”, “Item select color” and “Adjust window frame color” can be changed to Red, Green, Blue,or Gray.RESOLUTION NOTIFIERThis optimal resolution is 1920 x 1200. If ON is selected, a message will appear on the screen after 30 seconds,notifying you that the resolution is not at 1920 x 1200.HOT KEYYou can adjust the BRIGHTNESS and CONTRAST directly. When this function is set to ON, you can adjust thebrightness with “Left” or “Right” and the contrast with “Down” or “Up” buttons, while the OSD menu is off. Thestandard OSD can be accessed with the EXIT button.FACTORY PRESETSelecting Factory Preset allows you to reset all OSD control settings (BRIGHTNESS, CONTRAST, ECOMODE,AUTO BRIGHTNESS, BLACK LEVEL, IMAGE CONTROL, COLOR CONTROL SYSTEM, SHARPNESS, OFF TIMER,OFF MODE, OSD LEFT/RIGHT, OSD UP/DOWN, OSD TURN OFF, OSD TRANSPARENCY) back to the factorysettings. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button.InformationProvides information about the current resolution display and technical data including the preset timing being usedand the horizontal and vertical frequencies. Indicates the model and serial numbers of your monitor.OSD WarningOSD Warning menus disappear with EXIT button.NO SIGNAL: This function gives a warning when there is no Horizontal or Vertical Sync. After power isturned on or when there is a change of input signal, the No Signal window will appear.RESOLUTION NOTIFIER: This function warms if resolution other than the optimized resolution is used.After power is turned on or when there is a change of input signal or the video signal doesn’t have properresolution, the Resolution Notifier window will open. This function can be disabled in the MENU Tools.OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. Afterthe power is turned on or there is a change of input signal or if the video signal doesn’t have proper timing,the Out Of Range menu will appear.PORTRAIT WARNING: When the monitor is used in the portrait position, the brightness value will bereduced to 250 cd/m 2. If the Portrait Warning is ON, a message warning of the change in brightness willappear on the screen for 10 seconds.LUMINANCE WARNING: When the backlight cannot display the desired luminance, a message willappear on the display. To avoid this, reduce the BRIGHTNESS level or set the AUTO LUMINANCEfunction to OFF (page 18, TAG1).NOTE: It is possible to change the DVI SELECTION, to change the OFF MODE or to change the EDIDEXTENSION settings while the “NO SIGNAL” or “OUT OF RANGE” messages are displayed.For advanced user menu see “Appendix”.