NEC LCD4020-BK-IT User Manual

Also see for MultiSync LCD4020: Specifications User manual Specifications Manual User manual

NEC LCD4020-BK-IT User Manual Manual pdf 16 page image

English-10Control Panel1) POWERSwitches the power on/off. (See page 24)2) EXITActivates the OSD menu when the OSD menu is off.Exits from the current menu being displayed to theprevious menu within the OSD.3) PLUS(+)Increases the setting adjustment within OSD menu.Increases the audio output level when the OSD is off.4) MINUS(-)Decreases the setting adjustment within OSD menu.Decreases the audio output level when the OSD is off.5) UP( )Activates the OSD menu when the OSD menu is off.Moves the highlighted area up to select which setting to beadjust within OSD menu.6) DOWN( )Activates the OSD menu when the OSD menu is off.Moves the highlighted area down to select which settingto be adjust within OSD menu.7) INPUTSelects which signal connected to the display is shown.([DVI], [VGA], [RGB/HV], [HDMI] , [DVD/HD] ,[VIDEO] , [TV] )Acts as SET button within the OSD menu.8) Remote control sensor and Power indicatorReceives the signal when using the wireless remote control.(See page 14)Glows green when the LCD monitor is in active mode*. Glowsred when the LCD is in POWER OFF (ECO standby) mode.Glows amber when the LCD is in POWER OFF (standby)mode. Blinks amber when the monitor is in Power SaveMode. Green and amber blink alternately while in PowerStandby with the “SCHEDULE SETTINGS” function enabled.When a component failure is detected within the monitor, theindicator will blink red."*If "OFF" is selected in POWER INDICATOR(See page 30),the LED will not light when the LCD monitor is active mode".9) Main Power SwitchSeesaw Switch to turn the the main power on/off.Control Key Lock ModeThis function completely locks out access to all ControlKey functions.To enable the Control Key Lock Mode, press both “ ”and “ ” simultaneously and hold down for three (3)seconds.To go back to user mode, press both “ ” and “ ”simultaneously and hold down for three (3) seconds.Part Names and FunctionsDenotes AV unit function. All AV functions are enabled with the AVunit is installed. Not all models have the AV unit installed.Denotes Digital Tuner function. All DTV and AV functions areenabled when the DTV unit is installed. Not all models will havethe digital tuner installed.