NEC LCD4020-BK-IT User Manual

Also see for MultiSync LCD4020: Specifications User manual Specifications Manual User manual

NEC LCD4020-BK-IT User Manual Manual pdf 9 page image

EnglishEnglish-3Safety Precautionsand MaintenanceFOR OPTIMUM PERFORMANCE, PLEASE NOTETHE FOLLOWING WHEN SETTING UP ANDUSING THE MONITOR:DO NOT OPEN THE MONITOR. There are no user-serviceable parts inside and opening or removingcovers may expose you to dangerous shock hazardsor other risks. Refer all servicing to qualified servicepersonnel.Do not spill any liquids into the cabinet or use yourmonitor near water.Do not insert objects of any kind into the cabinet slots,as they may touch dangerous voltage points, which canbe harmful or fatal or may cause electric shock, fire orequipment failure.Do not place any heavy objects on the power cord.Damage to the cord may cause shock or fire.Do not place this product on a sloping or unstable cart,stand or table, as the monitor may fall, causing seriousdamage to the monitor.When operating the MultiSync monitor with its AC125-240V power supply, use a power supply cord thatmatches the power supply voltage of the AC poweroutlet being used. The power supply cord you use musthave been approved by and comply with the safetystandards of your country. (Type H05VV-F 3G 1mm²should be used in Europe)In the UK, use a BS-approved power cord with moldedplug having a black (13A) fuse installed for use withthis monitor. If a power cord is not supplied with thismonitor, please contact your supplier.Do not place any objects onto the monitor and do notuse the monitor outdoors.The lamps in this product contain mercury. Pleasedispose according to state, local or federal law.Do not bend, crimp or otherwise damage the powercord.Do not use monitor in high temperature, humid,dusty, or oily areas.Do not cover vent on monitor.If monitor or glass is broken, do not come in contactwith the liquid crystal.Handle broken glass with care.Allow adequate ventilation around the monitor so thatheat can properly dissipate. Do not block ventilatedopenings or place the monitor near a radiator or otherheat sources. Do not put anything on top of monitor.The power cable connector is the primary means ofdetaching the system from the power supply. Themonitor should be installed close to a power outletthat is easily accessible.••••••••••••••••Handle with care when transporting. Save packagingfor transporting.Do not hold the display by the bezel when moving orshifting the display.Keep the vent holes on the back of the LCD clean ofdirt and dust. It is recommended to wipe vent holeswith a soft cloth a minimum of once per year.If using the cooling fan continuously, it isrecommended to wipe vent holes a minimum of once amonth.CAUTIONImmediately unplug your monitor from the wall outlet andrefer servicing to qualified service personnel under the fol-lowing conditions:When the power supply cord or plug is damaged.If liquid has been spilled on, or objects have fallen intothe monitor.If the monitor has been exposed to rain or water.If the monitor has been dropped or the cabinetdamaged.If the monitor does not operate normally by followingoperating instructions.•••••••••Safety Precautions and Maintenance