NEC M155 User Manual

NEC M155 User Manual Manual pdf 38 page image

Messaging384. Repeatedly press the Upper key for a shorttime until the display shows: Inbox5. Press the Lower key for a short time.6. Repeatedly press the Upper key for a shorttime until the display shows: the requiredmessage stored in the Inbox of the M155.7. Press the Lower key for a short time.8. Press the Lower key for a short time.9. Repeatedly press the Upper key for a shorttime until the display shows: the messageyou want to send.[ ]10. Press the Lower key for a short time.The message is displayed. If so required use(repeatedly) pressing the Upper key for ashort time to scroll through the message.11. Press the Lower key for a short time.12. While sending the message the displayshows Sending.13. When the message is successfully sent Msg.sent is displayed.The M155 returns to the idle mode.Replying with a voice call to a stored incoming messageTo set up a voice call to the call back number indicated in a storedmessage, perform the following steps: