162. Projecting an Image (Basic Operation)Standby Blinking Power OnSteady orange light Blinking blue light Steady blue light Turning on the Projector1. Uncover the lens by sliding the lens cover (M350X/M300X/M260X/M230X/M300W/M260W/M420X/M420XV)or removing the lens cap (M350XS/M300XS/M260XS/M300WS/M260WS)[M350XS/M300XS/M260XS/M300WS/M260WS]• Do not remove the lens cap by pulling on the string.Doing so can cause mechanical damage to the partaround the lens.2. Press the (POWER) button on the projector cabinetor the POWER ON button on the remote control.The POWER indicator will turn to blue and the projectorwill become ready to use.TIP:• When the message “Projector is locked! Enter your password.”is displayed, it means that the [SECURITY] feature is turned on.(→ page 32)After you turn on your projector, ensure that the computeror video source is turned on and that the lens cover isopen.NOTE: When no input signal is present, the no-signal guidance isdisplayed (factory menu setting).(→ page 127)Lens coverLens cap
