533. Convenient Features Projecting Your Computer’s Screen Image from the Projectorover a LAN (Image Express Utility Lite)Using Image Express Utility Lite contained on the supplied NEC Projector CD-ROM allows you to send the computer’sscreen image to the projector over a USB cable or a wired or wireless LAN.This section will show you an outline about how to connect the projector to a LAN and to use Image Express UtilityLite. For the operation of Image Express Utility Lite, see the help of Image Express Utility Lite.Step 1: install Image Express Utility Lite on the computer.Step 2: Connect the projector to a LAN. (→ page 54)Step 3: Start Image Express Utility Lite. (→ page 54)What You can Do with Image Express Utility Lite• USB Display• Computer’s screen image can be projected via a USB cable, without connecting a computer cable (VGA).• Just connecting the computer and the projector over a USB cable will make the USB Display function available(Plug & Play) even without installing Image Express Utility Lite on the computer. (→ page 42)• Image transmission• The screen of your computer can be sent to the projector via a wired or wireless network without a computer cable(VGA).• By using “EASY CONNECTION” function, the complicated network settings can be simplified and the computerwill automatically connect to the projector.• The screen of your computer can be sent to up to four projectors at the same time.• Geometric Correction Tool (GCT)See “⓬ Projecting an Image from an Angle (Geometric Correction Tool in Image Express Utility Lite)”.Step 1: install Image Express Utility Lite on the computer.NOTE:• To install or uninstall the program, the Windows user account must have “Administrator” privilege (Windows 7, Windows Vistaand Windows XP).• Exit all running programs before installation. If another program is running, the installation may not be completed.• Image Express Utility Lite will be installed to the system drive of your computer.If the message “There is not enough free space on destination” is displayed, free up enough space (about 100 MB) to install theprogram.1. Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive.The menu window will be displayed.
