NEC M40-AV User Manual

Also see for M40 - MULTEOS - 40" LCD TV: Specifications Specifications User manual Features and benefits Manual

NEC M40-AV User Manual Manual pdf 12 page image

English-6InstallationMountingDO NOT mount the monitor yourself. Please ask dealer.For proper installation it is strongly recommended touse a trained, qualified technician. Please inspect thelocation where the unit is to be mounted. Not all wallsor ceilings are capable of supporting the weight of theunit. Product warranty does not cover damage caused byimproper installation, remodeling, or natural disasters.Failure to comply with these recommendations couldresult in voiding the warranty.DO NOT block ventilated openings with mountingaccessories or other accessories.For NEC Qualified Personnel:To insure safe installation, use two or more brackets tomount the unit. Mount the unit to at least two points on theinstallation location.Please note the following when mountingon wall or ceiling.When using mounting accessoriesother than those that are NECapproved, they must comply withthe VESA-compatible (FDMlv1)mounting method.NEC strongly recommends usingsize M6 screws (10mm + thicknessof bracket in length). If usingscrews longer than 10mm, check the depth of the hole.(Recommended Fasten Force: 470 - 635N·cm) NECrecommends mounting interfaces that comply withUL1678 standard in North America.Prior to mounting, inspect the installation location toinsure that it is strong enough to support the weight ofthe unit so that the unit will be safe from harm.Refer to the instructions included with the mountingequipment for detailed information.Mounting locationThe ceiling and wall must be strong enough to support themonitor and mounting accessories.DO NOT install in locations where a door or gate canhit the unit.DO NOT install in areas where the unit will besubjected to strong vibrations and dust.DO NOT install near where the main power supplyenters the building.Do not install in where people can easily grab and hangonto the unit or the mounting apparatus.When mounting in a recessed area, as in a wall, leave atleast 4 inches (10cm) of space between the monitor andthe wall for proper ventilation.•••••••••Allow adequate ventilation or provide air conditioningaround the monitor, so that heat can properly dissipateaway from the unit and mounting apparatus.Mounting on CeilingEnsure that the ceiling is sturdy enough to support theweight of the unit and the mounting apparatus overtime, against earthquakes, unexpected vibrations, andother external forces.Be sure the unit is mounted to a solid structure withinthe ceiling, such as a support beam. Secure the monitorusing bolts, spring lock washers, washer and nut.DO NOT mount to areas that have no supportinginternal structure. DO NOT use wood screws or anchorscrews for mounting. DO NOT mount the unit to trimor to hanging fixtures.MaintenancePeriodically check for loose screws, gaps, distortions,or other problems that may occur with the mountingapparatus. If a problem is detected, please refer toqualified personnel for service.Regularly check the mounting location for signs ofdamage or weakness that may occur over time.OrientationWhen using the display in the portrait position, the monitorshould be rotated clockwise so that the left side is moved tothe top and the LED indicator light is on the bottom. Thiswill allow for proper ventilation and will extend the lifetimeof the monitor. Improper ventilation may shorten the life-time of the monitor.••••••Unit MountingBracketThickness ofBracketScrew10mmScrew length should equal depth ofhole (10mm) + the thickness ofmounting bracket.LED indicator