NEC M40-AV User Manual

Also see for M40 - MULTEOS - 40" LCD TV: Specifications Specifications User manual Features and benefits Manual

NEC M40-AV User Manual Manual pdf 34 page image

English-28OSM Controls - continuedCLOCK PHASEVGA, RGB/HV, DVD/HDinput onlyAdjusts the visual “noise” on the image.H RESOLUTIONDVI, VGA, RGB/HVinput onlyAdjusts the horizontal size of the image.V RESOLUTIONDVI, VGA, RGB/HVinput onlyAdjusts the vertical size of the image.ZOOM MODE Select the aspect ratio of the screen image.BASE ZOOM Choose the zoom method16:914:9DYNAMICOFFCUSTOMSame aspect ratio as the LCD panel.14:9Expands a 4:3 picture to fill the screen in a non-linear (non-proportionate) manner andsome of the image will be lost due to expansion. DYNAMIC is the same as FULL sizeimage when HDTV 1080i signal is input.Selecting “OFF” will display the image in a 1 by 1 pixel format. (If the input resolution ishigher than a 1920 x 1080 resolution, the image will be scaled down to fit the screen.Displays an image as large as possible without changing the aspect ratio or cutting offpart of the image.ZOOMH ZOOMV ZOOMH POSV POSMaintains the aspect ratio while zooming.Amount of horizontal zoom. Can be adjusted for each BASE ZOOM setting.Amount of vertical zoom. Can be adjusted for each BASE ZOOM setting.Horizontal position. Can be adjusted for each BASE ZOOM setting.Vertical position. Can be adjusted for each BASE ZOOM setting.INPUT RESOLUTIONVGA and RGB/HV input onlyIf there is a problem with signal detection, this function forces the monitor to display thesignal at the desired resolution.If no problem is detected, the only available option will be “AUTO”.AUTO1024x7681280x7681360x7681366x7681440x10501680x1050ADJUST RESET Resets the following settings within the ADJUST menu back to factory setting:AUTO ADJUST, H POSITION, V POSITION, CLOCK, CLOCK PHASE, H RESOLUTION, VRESOLUTION, ZOOM MODE, INPUT RESOLUTION.AUDIO BALANCETREBLEBASSPIP AUDIO Selects source of PIP audio.AUDIO RESET Resets “AUDIO” options back to factory settings.SCHEDULE OFF TIMER Sets the monitor to power off after a length of time between 1 and 24 hours.SCHEDULE SETTING Creates a working schedule for the monitor to use. See page 34 for instructions.SCHEDULE LIST List of schedules.DATE & TIME Sets the date, time, and daylight saving region. Date & time must be set in order for the“SCHEDULE” function to operate.